First Edition (May 2001)
Part Number 230198-001
Compaq Computer Corporation
Compaq Confidential Need to Know Required
Writer: Amy L. Laffitte Project: Compaq Flat Panel Monitor Rackmount (TFT5010R) Comments: FINAL
Part Number: 230198-001 File Name: a-frnt.doc Last Saved On: 5/1/01 9:17 AM
Notice
2001 Compaq Computer Corporation.
Compaq, Compaq Insight Manager Registered United States Patent and Trademark Office.
Compaq shall not be liable for technical or editorial errors or omissions contained herein. The
information in this document is provided "as is" without warranty of any kind and is subject to change
without notice. The warranties for Compaq products are set forth in the express limited warranty
statements accompanying such products. Nothing herein should be construed as constituting an
additional warranty.
Compaq Flat Panel Monitor Rackmount (TFT5010R) Maintenance and Service Guide
First Edition (May 2001)
Part Number 230198-001
Compaq Confidential Need to Know Required
Writer: Amy L. Laffitte Project: Compaq Flat Panel Monitor Rackmount (TFT5010R) Comments: FINAL
Part Number: 230198-001 File Name: a-frnt.doc Last Saved On: 5/1/01 9:17 AM
Contents
About This Guide
Symbols in Text...........................................................................................................v
Symbols on Equipment...............................................................................................vi
Compaq Technician Notes.........................................................................................vii
Where to Go for Additional Help ............................................................................ viii
Integrated Management Display....................................................................... viii
Telephone Numbers.......................................................................................... viii
Chapter 1
Identifying Components
Front Panel Components.......................................................................................... 1-2
Rear Components..................................................................................................... 1-3
Serial Number Location........................................................................................... 1-4
Chapter 2
Illustrated Spare Parts List
Exploded View of Spare Parts ................................................................................. 2-2
Chapter 3
Removal and Replacement Preliminaries
Electrostatic ............................................................................................................. 3-2
Precautions ....................................................................................................... 3-2
Grounding Methods.......................................................................................... 3-2
Compaq Confidential Need to Know Required
Writer: Amy L. Laffitte Project: Compaq Flat Panel Monitor Rackmount (TFT5010R) Comments: FINAL
Part Number: 230198-001 File Name: a-frnt.doc Last Saved On: 5/1/01 9:17 AM
iv Compaq Flat Panel Monitor Rackmount (TFT5010R) Maintenance and Service Guide
Removal and Replacement Preliminaries
continued
Rack Stability........................................................................................................... 3-3
Chapter 4
Removal and Replacement Procedures
Spare Replaceable Parts ........................................................................................... 4-2
Product Kit Contents................................................................................................ 4-3
SPS-HRDW, TRAY, RAIL, HINGES 228298-001................................................. 4-4
Removing the Cable Management Arm............................................................ 4-5
Removing the Metal Tray ................................................................................. 4-8
Removing the Latch Bracket ............................................................................ 4-9
Removing the Rails......................................................................................... 4-10
Removing the Slides ....................................................................................... 4-12
SPS-PLASTICS 228300-001 ................................................................................. 4-13
Removing the Retma Rail Covers................................................................... 4-14
Removing the Front and Rear Plastic Bezels.................................................. 4-15
Removing the Tray Cover............................................................................... 4-17
SPS-MONITOR 228299-001................................................................................. 4-18
Removing the Monitor.................................................................................... 4-19
Replacing the Monitor .................................................................................... 4-21
SPS-AC ADAPTER 174610-001 .......................................................................... 4-25
Removing the AC Adapter.............................................................................. 4-26
SPS-HRDW, RACK, FIXED MNT 228297-001................................................... 4-27
Removing the Fixed Mount ............................................................................ 4-27
Compaq Confidential Need to Know Required
Writer: Amy L. Laffitte Project: Compaq Flat Panel Monitor Rackmount (TFT5010R) Comments: FINAL
Part Number: 230198-001 File Name: a-frnt.doc Last Saved On: 5/1/01 9:17 AM
Contents v
About This Guide
This Maintenance and Service Guide is a troubleshooting guide that can be
used for reference when servicing the Compaq Flat Panel Monitor Rackmount
TFT5010R.
WARNING: To reduce the risk of personal injury from electrical shock and hazardous energy
levels, only authorized service technicians should attempt to repair this equipment. Improper
repairs could create conditions that are hazardous.
IMPORTANT: The installation of options and servicing of this product shall be performed by individuals
who are knowledgeable of the procedures, precautions, and hazards associated with equipment
containing hazardous energy circuits.
Symbols in Text
These symbols may be found in the text of this guide. They have the following
meanings.
WARNING: Text set off in this manner indicates that failure to follow directions
in the warning could result in bodily harm or loss of life.
CAUTION: Text set off in this manner indicates that failure to follow directions
could result in damage to equipment or loss of information.
IMPORTANT: Text set off in this manner presents clarifying information or specific
instructions.
NOTE: Text set off in this manner presents commentary, sidelights, or interesting points
of information.
Compaq Confidential Need to Know Required
Writer: Amy L. Laffitte Project: Compaq Flat Panel Monitor Rackmount (TFT5010R) Comments: FINAL
Part Number: 230198-001 File Name: a-frnt.doc Last Saved On: 5/1/01 9:17 AM
vi Compaq Flat Panel Monitor Rackmount (TFT5010R) Maintenance and Service Guide
Symbols on Equipment
These icons may be located on equipment in areas where hazardous conditions
may exist.
Any surface or area of the equipment marked with these symbols
indicates the presence of electrical shock hazards. Enclosed area
contains no operator serviceable parts.
WARNING: To reduce the risk of injury from electrical shock hazards,
do not open this enclosure.
Any RJ-45 receptacle marked with these symbols indicates a Network
Interface Connection.
WARNING: To reduce the risk of electrical shock, fire, or damage to
the equipment, do not plug telephone or telecommunications
connectors into this receptacle.
Any surface or area of the equipment marked with these symbols
indicates the presence of a hot surface or hot component. If this
surface is contacted, the potential for injury exists.
WARNING: To reduce the risk of injury from a hot component, allow
the surface to cool before touching.
Power Supplies or Systems marked with these symbols
indicate the equipment is supplied by multiple sources of
power.
WARNING: To reduce the risk of injury from electrical shock,
remove all power cords to completely disconnect power from
the system.
Compaq Confidential Need to Know Required
Writer: Amy L. Laffitte Project: Compaq Flat Panel Monitor Rackmount (TFT5010R) Comments: FINAL
Part Number: 230198-001 File Name: a-frnt.doc Last Saved On: 5/1/01 9:17 AM
Contents vii
Compaq Technician Notes
WARNING: Only authorized technicians trained by Compaq should attempt to repair this
equipment. All troubleshooting and repair procedures are detailed to allow only
subassembly/module level repair. Because of the complexity of the individual boards and
subassemblies, no one should attempt to make repairs at the component level or to make
modifications to any printed wiring board. Improper repairs can create a safety hazard. Any
indications of component replacement or printed wiring board modifications may void any
warranty.
WARNING: To reduce the risk of personal injury from electrical shock and hazardous energy
levels, do not exceed the level of repair specified in these procedures. Because of the
complexity of the individual boards and subassemblies, do not attempt to make repairs at the
component level or to make modifications to any printed wiring board. Improper repairs could
create conditions that are hazardous.
WARNING: To reduce the risk of electric shock or damage to the equipment:
I If the system has multiple power supplies, disconnect power from the system by
unplugging all power cords from the power supplies.
I Do not disable the power cord grounding plug. The grounding plug is an important safety
feature.
I Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at
all times.
CAUTION: To properly ventilate your system, you must provide at least 12 inches (30.5 cm) of
clearance at the front and back of the computer.
CAUTION: The computer is designed to be electrically grounded. To ensure proper operation,
plug the AC power cord into a properly grounded AC outlet only.
Compaq Confidential Need to Know Required
Writer: Amy L. Laffitte Project: Compaq Flat Panel Monitor Rackmount (TFT5010R) Comments: FINAL
Part Number: 230198-001 File Name: a-frnt.doc Last Saved On: 5/1/01 9:17 AM
viii Compaq Flat Panel Monitor Rackmount (TFT5010R) Maintenance and Service Guide
Where to Go for Additional Help
In addition to this guide, the following information sources are available:
I User Documentation
I Compaq Service Quick Reference Guide
I Service Training Guides
I Compaq Service Advisories and Bulletins
I Compaq QuickFind
I Compaq Insight ManagerTM
I Compaq Download Facility: Call 1-281-518-1418
Integrated Management Display
Some Compaq server models include a Compaq Integrated Management
Display (IMD), an integrated, 16x4 character display mounted on the front of
the server. This display provides easy-to-use menu-driven access to server
information, including model number, LCD firmware revision, and POST
operations.
Telephone Numbers
For the name of your nearest Compaq authorized reseller:
I In the United States, call 1-800-345-1518.
I In Canada, call 1-800-263-5868.
For Compaq technical support:
I In the United States and Canada, call 1-800-386-2172.
I For Compaq technical support phone numbers outside the United States
and Canada, visit the Compaq website at:
www.compaq.com
Compaq Confidential Need to Know Required
Writer: Amy L. Laffitte Project: Compaq Flat Panel Monitor Rackmount (TFT5010R) Comments: FINAL
Part Number: 230198-001 File Name: a-frnt.doc Last Saved On: 5/1/01 9:17 AM
1
Chapter
Identifying Components
This chapter provides an illustrated parts breakdown and a serial number
location for the Compaq Flat Panel Monitor Rackmount (TFT5010R).
Use the following information to locate and identify the components of the
Compaq Flat Panel Monitor Rackmount (TFT5010R).
1-2 Compaq Flat Panel Monitor Rackmount (TFT5010R) Maintenance and Service Guide
Front Panel Components
1
2
7
6
5
4
3
Figure 1-1. Identifying front panel components
Table 1-1
Compaq Flat Panel Monitor Rackmount (TFT5010R)
Front Panel Components
Reference Number Description
Front plastic bezel
Monitor
On-screen display activation button
On-screen display scroll up button
On-screen display scroll down button
Power switch
Power LED
Identifying Components 1-3
Rear Components
1
2
3
4
5
6
7
Figure 1-2. Identifying rear components
Table 1-2
Compaq Flat Panel Monitor Rackmount (TFT5010R)
Rear Panel Components
Reference Number Description
Rear plastic bezel
AC adapter
Tray cover
VGA cable
Power cord
Cable management arm
Latch bracket
1-4 Compaq Flat Panel Monitor Rackmount (TFT5010R) Maintenance and Service Guide
Serial Number Location
You will need to provide the monitor serial number to Compaq whenever you
request information or order spare parts. The serial number is located on the
rear of the monitor below the VGA cables and power cords.
Figure 1-3. Serial number location
2
Chapter
Illustrated Spare Parts List
This chapter provides an exploded view identifying the spare parts for the
Compaq Flat Panel Monitor Rackmount (TFT5010R). See Table 2-1 for the
names of referenced spare parts.
2-2 Compaq Flat Panel Monitor Rackmount (TFT5010R) Mainteneance and Service Guide
Exploded View of Spare Parts
3
4
4
4
2
2
2
2
9
5
2
6
Figure 2-1. Exploded view of the Compaq Flat Panel Monitor Rackmount
(TFT5010R) spare parts list
Illustrated Spare Parts List 2-3
Table 2-1
Compaq Flat Panel Monitor Rackmount (TFT5010R)
Spare Parts List
Reference Number Description Spare Part #
SPS-HRDW, RACK, FIXED MNT 228297-001
SPS-HRDW, TRAY, RAIL, HINGES 228298-001
SPS-MONITOR 228299-001
SPS-PLASTICS 228300-001
I COVER, TRAY (136597-001)
I BEZEL, TOP (120209-001))
I BEZEL, BOTTOM (120210-
001))
I SCR, M3.0, MA, PAN, PHL,
CS, 22 (12575-002))
I SCR, 6-19, PT, PAN, T15,
CS, 3/8 (101346-069))
I COVER, ADP RAIL, AS, RIGHT
(386545-001))
SPS-CORD, AC, 12Ft 228301-001
SPS-CA, VIDEO, VGA-DVI, 3M 240864-001
SPS-CORD, AC, 12FT, -JP 228301-291
SPS-CORD, AC, 12FT, -EU 228301-002
SPS-AC ADAPTER 174610-001
SPS-CA, AC LINE, C5- C14, 192514-001
ADAPTER
3
Chapter
Removal and Replacement
Preliminaries
IMPORTANT: Before beginning any of the procedures in Chapter 4, read and understand the cautions
and warnings in this chapter.
This chapter provides general service information for the Compaq Flat Panel
Monitor Rackmount TFT5010R. Adherence to the procedures and precautions
described in this chapter are essential for proper service.
3-2 Compaq Flat Panel Monitor Rackmount (TFT5010R) Maintenance ans Service Guide
Electrostatic
CAUTION: When the computer is plugged into an AC power source there is always voltage
applied to the system board. You must disconnect the power cord from the power source
before opening the computer to prevent system board or component damage.
Precautions
To prevent damage to the system, be aware of the precautions you need to
follow when setting up the unit or handling parts. A discharge of static
electricity from a finger or other conductor may damage system boards or
other static-sensitive devices. This type of damage may reduce the life
expectancy of the device.
To prevent electrostatic damage, observe the following precautions:
I Avoid and contact by transporting and storing products in static-safe
containers.
I Keep electrostatic-sensitive parts in their containers until they arrive at
static-free workstations.
I Place parts on a grounded surface before removing them from their
containers.
I Avoid touching pins, leads, or circuitry.
I Make sure you are always properly grounded when touching a static-
sensitive component or assembly.
Grounding Methods
There are several methods for grounding. Use one or more of the following
methods when handling or installing electrostatic-sensitive parts:
I Use a wrist strap connected by a ground cord to a grounded workstation
or computer chassis. Wrist straps are flexible straps with a minimum of
1 megohm 10 percent resistance in the ground cords. To provide
proper ground, wear the strap snug against the skin.
I Use heel straps, toe straps, or boot straps at standing workstations.
Wear the straps on both feet when standing on conductive floors or
dissipating floor mats.
I Use conductive field service tools.
I Use a portable field service kit with a folding static-dissipating work
mat.
Removal and Replacement Preliminaries 3-3
Rack Stability
WARNING: To reduce the risk of personal injury or damage to the equipment,
be sure that:
I The leveling jackets are extended to the floor.
I The full weight of the rack rests on the leveling jacks.
I The stabilizing feet are attached to the rack if it is a single-rack
installation.
I The racks are coupled together in multiple-rack installations.
I A rack may become unstable if more than one component is extended for
any reason. Extend only one component at a time.
4
Chapter
Removal and Replacement Procedures
This chapter provides guidance for removing and replacing spare parts for the
Compaq Flat Panel Monitor Rackmount (TFT5010R).
Before you begin any of these procedures, be sure to turn off the power to the
monitor, computer system, and other attached devices; then disconnect the
power cable from the power source.
CAUTION: As you disassemble the TFT5010R, be sure to place the screws in a
safe place, and separate them according to their groupings.
After completing all necessary removal and replacement procedures, power up
the Compaq Flat Panel Monitor Rackmount (TFT5010R) to verify that all
components are operating properly.
4-2 Compaq Flat Panel Monitor Rackmount (TFT5010R) Maintenance and Service Guide
Spare Replaceable Parts
The Compaq Flat Panel Monitor Rackmount (TFT5010R) contains the
following replaceable parts:
I SPS-HRDW, TRAY, RAIL, HINGES 228298-001
G Metal tray
G Cable management arm
G Latch bracket
G Slides and rails
I SPS-PLASTICS 228300-001
G Retma rail covers
G Front plastic bezel
G Rear plastic bezel
G Tray cover
I SPS-MONITOR 228299-001
I SPS-AC ADAPTER 174610-001
I SPS-CORD, AC, 12 FT 228301-001
I SPS-CA, AC LINE, C5- C14, ADAPTER 192514-001
I SPS-CA, VIDEO, VGA-DVI, 3M 240864-001
Removal and Replacement Procedures 4-3
Product Kit Contents
I Compaq Flat Panel Monitor Rackmount (TFT5010R)
I Rail mounting brackets (2)
I Cable management arm with hardware
I Latch bracket (2)
I Rack template card
I M6 screws (6)
I Screws, part number 125275-003 (4)
I Retma rail covers (2)
I Double sided tape
This kit may contain extra pieces of hardware for your convenience.
4-4 Compaq Flat Panel Monitor Rackmount (TFT5010R) Maintenance and Service Guide
SPS-HRDW, TRAY, RAIL, HINGES 228298-001
Figure 4-1. SPS-HRDW, TRAY, RAIL, HINGES 228298-001
Table 4-1
SPS-HRDW, TRAY, RAIL, HINGES 228298-001
Reference Number Description
Metal tray
Slides and rails
Latch bracket
Cable management arm
Removal and Replacement Procedures 4-5
Removing the Cable Management Arm
To remove the cable management arm:
1. Remove the cables from the fasteners provided along the cable
management arm.
Figure 4-2. Removing cables from the cable management arm
4-6 Compaq Flat Panel Monitor Rackmount (TFT5010R) Maintenance and Service Guide
2. Remove the two screws from the rear of the cable management arm.
Figure 4-3. Removing screws from the cable management arm
Removal and Replacement Procedures 4-7
3. Unscrew and remove the two thumbscrews attached to the rear of the
metal tray and remove the cable management arm .
2
1
3
Figure 4-4. Unfastening thumbscrews and removing cable management arm
To replace the cable management arm, reverse the above steps.
4-8 Compaq Flat Panel Monitor Rackmount (TFT5010R) Maintenance and Service Guide
Removing the Metal Tray
To remove the metal tray:
1. Disconnect the cables from their source.
2. Remove the tray cover.
3. Remove the AC adapter.
4. Fully extend the slides and rails on the metal tray assembly. Hold the
metal tray assembly firmly while pushing in the metal release levers on
each of the mounting brackets, and remove the metal tray assembly.
Figure 4-5. Removing metal tray assembly
5. Remove the two screws securing each slide to the metal tray.
6. Remove the monitor.
To replace the metal tray, reverse the above steps.
Removal and Replacement Procedures 4-9
Removing the Latch Bracket
To remove the latch bracket:
1. Unscrew and remove the thumbscrews on each side of the latch
bracket.
2. Remove the latch bracket .
3
1
2
Figure 4-6. Unfastening latch bracket thumbscrews
To replace the latch bracket, reverse the above steps.
4-10 Compaq Flat Panel Monitor Rackmount (TFT5010R) Maintenance and Service Guide
Removing the Rails
To remove the rails:
1. Fully extend the slides and rails on the metal tray assembly. Hold the
metal tray assembly firmly while pressing in the metal release levers on
each of the mounting brackets, and remove the metal tray assembly.
2. Remove the two rail mounting brackets and screws securing each
rail to the rear of the rack.
1
2
Figure 4-7. Removing rail mounting brackets and screws from the rear rails
Removal and Replacement Procedures 4-11
3. Remove the two front screws securing each rail to the rack.
Figure 4-8. Removing screws from the front of the rack
4. Remove the rails from the rack.
To replace the rails, reverse the above steps.
4-12 Compaq Flat Panel Monitor Rackmount (TFT5010R) Maintenance and Service Guide
Removing the Slides
To remove the slides:
1. Remove the two screws securing each slide to the metal tray.
Figure 4-9. Removing screws from slides
2. Remove the slides from the metal tray.
To replace the slides, reverse the above steps.
Removal and Replacement Procedures 4-13
SPS-PLASTICS 228300-001
Figure 4-10. SPS-PLASTICS 228300-001
Table 4-2
SPS-PLASTICS 228300-001
Reference Number Description
Tray cover
Front plastic bezel
Retma rail covers
Rear plastic bezel
4-14 Compaq Flat Panel Monitor Rackmount (TFT5010R) Maintenance and Service Guide
Removing the Retma Rail Covers
To remove the Retma rail covers:
Remove one screw from each Retma rail cover and remove both rail
covers .
2
1
Figure 4-11. Removing Retma rail covers
To replace the Retma rail covers, reverse the above step.
Removal and Replacement Procedures 4-15
Removing the Front and Rear Plastic Bezels
NOTE: The screws securing the rear plastic bezel also secure the front plastic bezel;
therefore, when removing the rear plastic bezel, the front plastic bezel is also removed.
To remove the front and rear plastic bezels:
1. Remove the four screws, two on each side, securing the rear plastic
bezel to the monitor.
Pus
h
Figure 4-12. Removing screws securing rear plastic bezel
4-16 Compaq Flat Panel Monitor Rackmount (TFT5010R) Maintenance and Service Guide
2. Remove the six screws, three on each side, securing the front plastic
bezel to the monitor frame.
Pus
h
Figure 4-13. Removing screws securing front plastic bezel
3. Remove the front and rear plastic bezel.
To replace the front and rear plastic bezels, reverse the above steps.
Removal and Replacement Procedures 4-17
Removing the Tray Cover
To remove the tray cover:
Use your thumb to push in on the tray cover tabs on the back of the tray; then
lift off the tray cover.
Figure 4-14. Removing tray cover
To replace the tray cover, reverse the above step.
4-18 Compaq Flat Panel Monitor Rackmount (TFT5010R) Maintenance and Service Guide
SPS-MONITOR 228299-001
Figure 4-15. SPS-MONITOR 228299-001
NOTE: The front and rear plastic bezels are not included in the SPS-MONITOR 228299-
001 spare kit. The front and rear plastic bezels can be obtained by ordering the SPS-
PLASTICS 228300-001 spare kit.
Removal and Replacement Procedures 4-19
Removing the Monitor
IMPORTANT: Before removing the monitor, the cable management arm and Retma rail
covers must be removed.
To remove the monitor:
1. Disconnect cables from their source.
2. Remove the four screws, two on each side, securing the monitor to the
metal tray, and set the monitor on a flat, non-abrasive, unobstructed
surface.
Pus
h
Figure 4-16. Removing screws securing monitor to metal tray
4-20 Compaq Flat Panel Monitor Rackmount (TFT5010R) Maintenance and Service Guide
3. Remove the front and rear plastic bezels.
4. Remove the VGA cable and power cord from the monitor.
Figure 4-17. Removing VGA cable and power cord
Removal and Replacement Procedures 4-21
Replacing the Monitor
To replace the monitor:
1. Place the front plastic bezel on the monitor and lay the monitor on a flat,
non-abrasive, unobstructed surface.
Figure 4-18. Replacing front plastic bezel
4-22 Compaq Flat Panel Monitor Rackmount (TFT5010R) Maintenance and Service Guide
2. Wrap the VGA cable and power cord around the perimeter of the
monitor.
Figure 4-19. Wrapping VGA cable and power cord around monitor
Removal and Replacement Procedures 4-23
3. Place the rear plastic bezel over the VGA cable and power cord, making
sure they are routed under the bezel, as shown in Figure 4-20.
4. Insert four screws, two on each side, securing the rear plastic bezel to
the monitor.
Pus
h
Figure 4-20. Securing rear plastic bezel to the monitor
4-24 Compaq Flat Panel Monitor Rackmount (TFT5010R) Maintenance and Service Guide
5. Insert six screws, three on each side, securing the rear plastic bezel to
the monitor frame.
Pus
h
Figure 4-21. Securing rear plastic bezel to the monitor frame
6. Hold the monitor assembly firmly while securing it with four screws to
the metal tray assembly.
Removal and Replacement Procedures 4-25
SPS-AC ADAPTER 174610-001
Figure 4-22. SPS-AC ADAPTER 174610-001
4-26 Compaq Flat Panel Monitor Rackmount (TFT5010R) Maintenance and Service Guide
Removing the AC Adapter
To remove the AC adapter:
1. Disconnect the power cord from the AC adapter and unthread the cord
through the rear of the tray.
2. Remove the AC adapter from the self-adhesive tape.
Figure 4-23. Lifting the AC adapter
To replace the AC adapter, reverse the above steps.
Removal and Replacement Procedures 4-27
SPS-HRDW, RACK, FIXED MNT 228297-001
Removing the Fixed Mount
To remove the fixed mount:
1. Disconnect all cables from their source.
2. Remove the power supply tray with the AC adapter.
3. Separate the AC adapter from the self-adhesive tape in the power supply
tray.
Figure 4-24. Removing power supply tray
4-28 Compaq Flat Panel Monitor Rackmount (TFT5010R) Maintenance and Service Guide
4. Remove the four screws securing the monitor assembly to the rack.
5. Remove the monitor assembly from the rack.
Figure 4-25. Removing screws securing monitor to the rack
Removal and Replacement Procedures 4-29
6. Lay the monitor assembly on a flat, non-abrasive, unobstructed surface.
7. Remove the four screws securing the fixed mount bracket; then remove
the fixed mount bracket.
Figure 4-26. Removing screws securing fixed mount bracket
To replace the fixed mount, reverse the above steps.
Index
cables
disconnecting 4-8, 4-19, 4-26
A
removing VGA 4-20
SPS-CA, VIDEO, VGA-DVI,
AC adapter
3M 4-2
illustrated 1-3
cautions See also warnings
removing 4-8, 4-26, 4-27
grounding vii
replacing 4-26
overheating vii
SPS-AC ADAPTER 174610-
retaining hardware 4-1
001 4-2
symbol v
SPS-CA, AC LINE, C5-C14,
ventilation clearances vii
ADAPTER 192514-
voltage 3-2
001 2-3
Compaq Download Facility,
telephone number viii
B
components
BEZEL, BOTTOM 120210- front panel 1-2
001 2-3 identifying 1-1
BEZEL, TOP 120209-001 2-3 rear 1-3
boot straps conductive field service tools 3-2
grounding methods 3-2 conductive floors 3-2
buttons, OSD, illustrated 1-2 cords
removing power cord 4-20
SPS-CORD, AC, 12 FT
C
228301-001 4-2
cable management arm SPS-CORD, AC, 12FT, -EU
illustrated 1-3, 4-4 228301-002 2-3
removing 4-5 SPS-CORD, AC, 12FT, -JP
replacing 4-7 228301-291 2-3
SPS-HRDW, TRAY, RAIL, coupling racks, rack stability 3-3
HINGES 228298-001 4-4 COVER, ADP RAIL, AS, RIGHT
386545-001 2-3
COVER, TRAY 136597-001 2-3
Compaq Confidential Need to Know Required
Writer: Amy L. Laffitte Project: Compaq Flat Panel Monitor Rackmount (TFT5010R) Comments: FINAL
Part Number: 230198-001 File Name: x-index.doc Last Saved On: 5/1/01 1:38 PM
2 Compaq Flat Panel Monitor Rackmount (TFT5010R) Maintenance Service Guide
D G
disconnecting grounding methods 3-2
cables 4-8, 4-19
dissipating floor mats 3-2 H
handling, electrostatic-sensitive
E
parts 3-2
hardware
electrostatic
SPS-HRDW, RACK, FIXED
description 3-2
MNT 228297-001 4-27
grounding methods 3-2
SPS-HRDW, TRAY, RAIL,
precautions 3-2
HINGES 228298-001
preventing 3-2
kit contents 4-2
exploded view of spare parts 2-2
heel straps
extending
grounding methods 3-2
components, rack stability 3-3
help
metal tray 4-8, 4-10
additional sources viii
slides and rails 4-8, 4-10
Compaq authorized resellers,
telephone numbers viii
F
Compaq website viii
fixed mount technical support telephone
removing 4-27 numbers viii
replacing 4-29
SPS-HRDW, RACK, FIXED I
MNT 228297-001 4-27
fixed mount bracket, icons, symbols on equipment vi
removing 4-29 identifying components 1-1
front and rear plastic bezels illustrated spare parts list 2-1
illustrated 4-13 illustrations
removing 4-15, 4-20 exploded spare parts 2-2
replacing 4-16 front panel components 1-2
SPS-PLASTICS 228300- lifting the AC adapter 4-26
001 4-13 rear components 1-3
front panel components 1-2 removing cables from cable
front plastic bezel management arm 4-5
BEZEL, TOP 120209-001 2-3 removing metal tray
illustrated 1-2, 4-13 assembly 4-8
removing 4-16 removing power supply
replacing 4-21 tray 4-27
SPS-PLASTICS 228300- removing rail mounting
001 4-13 brackets 4-10
Compaq Confidential Need to Know Required
Writer: Amy L. Laffitte Project: Compaq Flat Panel Monitor Rackmount (TFT5010R) Comments: FINAL
Part Number: 230198-001 File Name: x-index.doc Last Saved On: 5/1/01 1:38 PM
Index 3
removing Retma rail L
covers 4-14
latch bracket
removing scews front plastic
illustrated 1-3, 4-4
bezel 4-16
removing 4-9
removing screws from cable
replacing 4-9
management arm 4-6
SPS-HRDW, TRAY, RAIL,
removing screws from
HINGES 228298-001 4-4
rails 4-11
thumbscrews 4-9
removing screws from
leveling jackets, rack stability 3-3
slides 4-12
location, serial number 1-4
removing screws securing fixed
mount bracket 4-29
removing screws securing M
monitor to metal tray 4-19
menu button, illustrated 1-2
removing screws securing
metal tray
monitor to the rack 4-28
extending 4-8, 4-10
removing screws securing rear
illustrated 4-4
plastic bezel 4-15
removing 4-8
removing tray cover 4-17
replacing 4-8
removing VGA cable and
SPS-HRDW, TRAY, RAIL,
power cord 4-20
HINGES 228298-001 4-4
replacing front plastic
kit contents 4-2
bezel 4-21
minus button, illustrated 1-2
securing rear plastic bezel to
monitor
monitor 4-23, 4-24
components, illustrated 1-2
serial number 1-4
illustrated 1-2, 4-18
unfastening latch bracket
removing 4-8, 4-19, 4-21
thumbscrew 4-9
replacing 4-21
unfastening thumbscrews from
securing to metal tray 4-24
cable management
serial number location 1-4
arm 4-7
SPS-MONITOR 228299-001
wrapping VGA cable and
kit contents 4-2
power cord 4-22
monitor assembly, removing 4-28
IMD (Integrated Management
Display)
description viii
important See also notes
before beginning
procedures 3-1
before removing monitor 4-19
symbol v
installing, electrostatic-sensitive
parts 3-2
Compaq Confidential Need to Know Required
Writer: Amy L. Laffitte Project: Compaq Flat Panel Monitor Rackmount (TFT5010R) Comments: FINAL
Part Number: 230198-001 File Name: x-index.doc Last Saved On: 5/1/01 1:38 PM
4 Compaq Flat Panel Monitor Rackmount (TFT5010R) Maintenance Service Guide
N R
notes See also important rack stability 3-3
bezels not included in monitor rail mounting brackets
spare kit 4-18 removing 4-10
screws secure both rails
bezels 4-15 illustrated 4-4
symbol v removing 4-10
notice ii replacing 4-11
SPS-HRDW, TRAY, RAIL,
HINGES 228298-001 4-4
O
rear components 1-3
rear plastic bezel
OSD buttons, illustrated 1-2
BEZEL, BOTTOM 120210-
001 2-3
P
illustrated 1-3, 4-13
photographs removing 4-15
AC ADAPTER 174610- replacing 4-23
001 4-25 SPS-PLASTICS 228300-
SPS-HRDW, TRAY, RAIL, 001 4-13
HINGES 228298-001 4-4 removal and replacement
SPS-MONITOR 228299- preliminaries 3-1
001 4-18 procedures 4-1
SPS-PLASTICS 228300- removing
001 4-13 AC adapter 4-8, 4-26, 4-27
plastics spare kit cable management arm 4-5
front bezel 4-13 cables from fastners 4-5
rear bezel 4-13 fixed mount bracket 4-29
Retma rail covers 4-13 fixed mount kit 4-27
SPS-PLASTICS 228300- front and rear plastic
001 4-2 bezels 4-15, 4-20
tray cover 4-13 front plastic bezel 4-16
plus button, illustrated 1-2 latch bracket 4-9
portable field service kit 3-2 metal tray 4-8
power cord monitor 4-8, 4-19, 4-21
illustrated 1-3 monitor assembly from
removing 4-20 rack 4-28
power LED, illustrated 1-2 power cord 4-20
power switch, illustrated 1-2 power supply tray 4-27
precautions, electrostatic rail mounting brackets 4-10
discharge 3-2 rails 4-10
preliminaries, removal and rear plastic bezel 4-15
replacement 3-1 Retma rail covers 4-14
procedures for removal and slides 4-8, 4-12
replacement 4-1 tray cover 4-8, 4-17, 4-27
product kit contents 4-3 VGA cable 4-20
Compaq Confidential Need to Know Required
Writer: Amy L. Laffitte Project: Compaq Flat Panel Monitor Rackmount (TFT5010R) Comments: FINAL
Part Number: 230198-001 File Name: x-index.doc Last Saved On: 5/1/01 1:38 PM
Index 5
latch bracket 4-4
replacing
metal tray 4-4
AC adapter 4-26
SPS-HRDW, TRAY, RAIL,
cable management arm 4-7
HINGES 228298-001
fixed mount 4-29
kit contents 4-2
front and rear plastic
slides and rails, extending 4-10
bezels 4-16
spare part numbers
front plastic bezel 4-21
174610-001 2-3
latch bracket 4-9
192514-001 2-3
metal tray 4-8
228297-001 2-3
monitor 4-21
228298-001 2-3
rails 4-11
228299-001 2-3
rear plastic bezel 4-23
228300-001 2-3
Retma rail covers 4-14
228301-001 2-3
slides 4-12
228301-002 2-3
tray cover 4-17
228301-291 2-3
Retma rail covers
240864-001 2-3
COVER, ADP RAIL, AS,
spare parts
RIGHT 386545-001 2-3
exploded view 2-2
illustrated 4-13
SPS-AC ADAPTER 174610-001
removing 4-14
illustrated 4-25
replacing 4-14
kit contents 4-2
RJ-45 receptacle vi
SPS-CA, AC LINE, C5-C14,
ADAPTER 192514-001 2-3
S
SPS-CA, VIDEO, VGA-DVI, 3M
SCR, 6-19, PT, PAN, T15, CS, 3/8 240864-001 4-2
101346-069 2-3 SPS-CORD, AC, 12 FT 228301-
SCR, M3.0, MA, PAN, PHL, CS, 001 4-2
22 12575-002 2-3 SPS-CORD, AC, 12FT, -EU
screws 228301-002 2-3
SCR, 6-19, PT, PAN, T15, CS, SPS-CORD, AC, 12FT, -JP
3/8 101346-069 2-3 228301-291 2-3
SCR, M3.0, MA, PAN, PHL, SPS-HRDW, RACK, FIXED MNT
CS, 22 12575-002 2-3 228297-001 4-27
self-adhesive tape 4-26 SPS-HRDW, TRAY, RAIL,
serial number location 1-4 HINGES 228298-001
slides illustrated 4-4
illustrated 4-4 kit contents 4-2
removing 4-8, 4-12 SPS-MONITOR 228299-001
replacing 4-12 illustrated 4-18
SPS-HRDW, TRAY, RAIL, kit contents 4-2
HINGES 228298-001 4-4 SPS-PLASTICS 228300-001
kit contents 4-2 illustrated 4-13
slides and rails spare kit kit contents 2-3, 4-2
cable management arm 4-4 stabilizing feet, rack stability 3-3
illustrated 4-4 symbols in text v
Compaq Confidential Need to Know Required
Writer: Amy L. Laffitte Project: Compaq Flat Panel Monitor Rackmount (TFT5010R) Comments: FINAL
Part Number: 230198-001 File Name: x-index.doc Last Saved On: 5/1/01 1:38 PM
6 Compaq Flat Panel Monitor Rackmount (TFT5010R) Maintenance Service Guide
symbols on equipment vi V
VGA cable
T illustrated 1-3
removing 4-20
technical support
Compaq website viii
telephone numbers viii W
technician notes vii
warnings See also cautions
telephone numbers
component level repairs vii
Compaq authorized
electrical shock v, vi, vii
resellers viii
equipment damage vii
Compaq Download
grounding plug vii
Facility viii
hazardous energy levels vii
technical support viii
improper repairs vii
thumbscrews
personal injury v, vii
cable management arm 4-7
rack stability 3-3
latch bracket 4-9
symbol v
toe straps
voiding warranty vii
grounding methods 3-2
wrist straps, grounding
tray cover
methods 3-2
illustrated 1-3, 4-13
www.compaq.com viii
removing 4-8, 4-17, 4-27
replacing 4-17
SPS-PLASTICS 228300-
001 4-13
tabs 4-17
Compaq Confidential Need to Know Required
Writer: Amy L. Laffitte Project: Compaq Flat Panel Monitor Rackmount (TFT5010R) Comments: FINAL
Part Number: 230198-001 File Name: x-index.doc Last Saved On: 5/1/01 1:38 PM
| 101346-069
120209-001
125275-003
136597-001
174610-001
192514-001
228297-001
228298-001
228299-001
228300-001
228301-001
228301-002
228301-291
230198-001
240864-001
386545-001
|
