MODELS
Compaq NC6133 Gigabit Module 1000 LX Upgrade Module for the NC3134 and NC3131
338456-B24
With this Gigabit upgrade module for the NC3134 or NC3131 Fast Ethernet adapters, Compaq has the only industry-standard, long haul, scaleable
transition path from Ethernet to Fast Ethernet to Bonded Fast Ethernet to long haul fiber Gigabit.
Optional Upgrade Modules for use with the NC3134 or NC3131:
NC6132 1000 SX Upgrade Module
338456-B23
NC3135 Dual 10/100 Upgrade Module
138604-B21
NC3133 100 FX Upgrade Module
338456-B25
NC3132 Dual 10/100 Upgrade Module
338456-B22
Fast Ethernet Server Adapters:
NC3134 Fast Ethernet NIC 64 PCI Dual Base 10/100
138603-B21
NC3131 Fast Ethernet NIC 64 PCI Dual Base 10/100
338456-B21
NC3123 Fast Ethernet NIC PCI, 10/100 Wake on LAN
174830-B21
Gigabit Server Adapters:
NC7131 Gigabit Server Adapter PCI, 64/66, 10/100/1000-T
158575-B21
NC6136 Gigabit Server Adapter PCI, 64/66, 1000-SX
203539-B21
OVERVIEW
With the Compaq NC6133 Gigabit Module, Compaq offers the industry's only long haul Gigabit adapter. The modular approach allows a Gigabit network
connection to be added to the server without having to replace the base adapter. The NC6133, when added to an existing NC3134 or NC3131, provides
three high-speed network connections through one PCI slot.
The 1000-LX upgrade module provides a scalable transition for environments with distances requiring up to 16,404.15 feet (5000 meters).
DA-10307 World Wide -- Version 8 -- August 7, 2001 1
QuickSpecs Compaq NC6133 Gigabit Module 1000 LX
PERFORMANCE
32-/64-bit Bus-mastering
The NC6133 offers the highest data transfer method available between a network and a server for high performance and low CPU utilization. The NC6133
operates in 32- or 64-bit PCI slots and uses bus-mastering technology to maximize throughput and minimize CPU utilization.
Port Bonding
Transmit Load Balancing (TLB) and Switch-Assisted Load Balancing (FEC/GEC/802.3ad static-mode configuration only) are two port-bonding methods
supported by the NC6133. TLB provides both failover and balancing of transmit traffic across all adapters for increased performance. For even higher
performance, Switch-Assisted Load Balancing (SLB) provides port failover and balancing of both transmit and receive traffic across all adapters when
connected to a switch that supports this feature.
Jumbo Frames
Jumbo Frames (also known as Extended Frames) offer a 9K byte Maximum Transmission Unit (MTU), which is six times the size of traditional Ethernet
frames. Like all Compaq Gigabit server adapters, the NC6133, supports jumbo frames as a way to achieve higher throughput and better CPU utilization
when deploy in a network infrastructure that supports them. Jumbo frames are particularly useful for database transfers and tape backups.
EASE OF USE
Plug and Play
Fully compliant with the 2.1 PCI specification, the NC6133 uses the system resources to automatically configure its memory and interrupt settings.
SECURITY/RELIABILITY
Network Fault Tolerance (NFT)
The Network Fault Tolerance feature of the NC6133 ensures that the server can always keep an active link. Using either of the ports on the base adapter
or after installing a second, compatible adapter, if the primary network connection fails, the second, backup adapter will automatically take over, retaining
the network connection. The NC6133 can be configured to fail over to any NC31xx, NC61xx, or NC71xx adapter by using the latest drivers.
PCI Hot Plug
The NC6133 includes PCI Hot Plug support, which enables it to be replaced or added to a server without powering down the system. This feature
provides increased system availability and non-stop serviceability in business-critical computing environments. The NC6133 plugs into the NC3134 or
NC3131 Fast Ethernet adapters without requiring any tools.
N E T W O R K MA N A G E M E N T
Standards-based
The NC6133 supports the following Compaq Management tools and industry network management standards.
Compaq Insight ManagerTM
Compaq Insight Manager XE
SNMP
DMI 2.0
Web-Based Enterprise Management (WBEM)
Server Integration
Compaq's SmartStart configuration utility includes setup support for the NC6133 so it can be configured as part of the SmartStart configuration process.
Compaq Insight Manager and the Compaq Network Management System (CNMS) can collect and report SNMP statistics on server adapter events.
Integrated Management Log (IML) support is provided by the NC6133 for critical event logging on Compaq servers.
Configuration Utilities
Each NC6133 ships with a suite of OS-tailored configuration utilities that allow the user to run initial diagnostics and configure adapter teams for Network
Fault Tolerance, Transmit Load Balancing, or Switch-Assisted Load Balancing (FEC/GEC/802.3ad static-mode configuration only) in the Windows 2000
and Windows NT operating systems.
Diagnostic LED Indicators
LEDs show link integrity and network activity "at-a-glance" for easy troubleshooting.
DA-10307 World Wide -- Version 8 -- August 7, 2001 2
QuickSpecs Compaq NC6133 Gigabit Module 1000 LX
SPECIFICATIONS
IEEE 802.3z compliant 1000 Mbps Ethernet specification
Compliance
PCI 2.1
Communications Processor Intel 82542
General Specifications
Full duplex
On-board memory 64 KB
Data path 32 and 64 bit/33 MHz
Interrupt levels INTC
Bus architecture PCI bus-mastering
Connector SC
Wavelength LX = 1,300nm
Distance Up to 16,404 ft/5,000 m with single mode fiber
Up to 1,804 ft/550 m with multimode fiber
Wiring Single mode fiber (10m)
Multimode fiber (62.5/125m and 50/125m)
Dimensions (LxW) 6 x 2.5 in/15 x 6.4 cm
64-bit addresses for systems with more than 4 GB of physical memory
64-bit PCI host interface compliant with PCI 2.1
Command usage optimization for advanced PCI commands (MWI and memory reads)
Software controlled global reset bit (resets everything except PCI configuration registers)
Operating Temperature 32 to 131F/0 to 55C
Power and Environmental
Specifications Humidity 10% to 90%
Non-operating Temperature 85 to 185F/65 to 85C
Humidity 5% to 95%
Power requirement 1025 mA @ 5V maximum
Emissions standards FCC Class B
Safety compliance CE Mark
Windows 2000
Operating System Support
Windows NT 4.0
Windows NT 3.51
Novell NetWare 5.x Server
Novell NetWare 4.x Server
Novell NetWare 3.x Server
SCO UnixWare 7.x
SCO OpenServer 5.x
SCO UnixWare 2.1
OS/2 Warp Server
NC6133 upgrade module hardware
Kit Contents
CD-ROM: software and documentation
Quick Install Card
Product Quality Statement
Product Warranty Statement
DA-10307 World Wide -- Version 8 -- August 7, 2001 3
QuickSpecs Compaq NC6133 Gigabit Module 1000 LX
SPECIFICATIONS (continued)
Software Feature Support by
Operating System
NetWare 3.12, 3.2 Server
NetWare 4.11 Server
NetWare 5.0 Server
Windows NT 3.51
Windows NT 4.0
Open Server 5.x
Windows 2000
UnixWare v2.x
UnixWare 7.x
Linux 32-bit
FEATURE
TLB
SLB
NFT
* *
PCI Hot Plug
Configuration Utility
DMI 2.0
SNMP
SmartStart
WBEM
Compaq Insight Manager
Compaq Insight Manager XE
IML
*Windows 2000: Hot Plug add/replace; NT 4.0: Hot Plug replace only
Warranty
Maximum: The remaining warranty of the Compaq server product in which it is installed (to a maximum of a three-year limited warranty).
Minimum: One-year, on-site limited warranty.
Note: Certain restrictions and exclusions apply. In North America, call 1-800-OK-COMPAQ; outside of North America, please contact your customer
service center.
For additional information about Compaq and its products, refer to the Compaq web site at http://www.compaq.com.
For further information on Compaq networking products, contact Compaq Sales at 1-800-544-5255 or the Compaq Technical Support Center (post sales)
at 1-800-386-2172. For customer support and information about Compaq and its products, call 1-800-OK-COMPAQ.
DA-10307 World Wide -- Version 8 -- August 7, 2001 4
| 138603-B21
138604-B21
158575-B21
174830-B21
203539-B21
338456-B21
338456-B22
338456-B23
338456-B24
338456-B25
|
