Second Edition (June 2000)
Part Number 169545-002
Compaq Computer Corporation
Compaq Confidential Need to Know Required
Writer: RWeaver Project: Compaq ProLiant DL360 Setup and Installation Guide Comments:
Part Number: 169545-002 File Name: a-frnt.doc Last Saved On: 6/12/00 6:31 PM
Notice
2000 Compaq Computer Corporation
Compaq and the Compaq logo Registered in U.S. Patent and Trademark Office.
Microsoft, MS-DOS, Windows, and Windows NT are trademarks of Microsoft Corporation.
Intel, Pentium, and i960 are trademarks of Intel Corporation in the United States.
The Open Group and UNIX are trademarks of The Open Group.
All other product names mentioned herein may be trademarks or registered trademarks of their
respective companies.
Confidential computer software. Valid license from Compaq required for possession, use or copying.
Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software
Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under
vendor's standard commercial license.
Compaq shall not be liable for technical or editorial errors or omissions contained herein. The
information in this document is subject to change without notice.
The information in this publication is subject to change without notice and is provided "AS IS"
WITHOUT WARRANTY OF ANY KIND. THE ENTIRE RISK ARISING OUT OF THE USE OF
THIS INFORMATION REMAINS WITH RECIPIENT. IN NO EVENT SHALL COMPAQ BE
LIABLE FOR ANY DIRECT, CONSEQUENTIAL, INCIDENTAL, SPECIAL, PUNITIVE OR
OTHER DAMAGES WHATSOEVER (INCLUDING WITHOUT LIMITATION, DAMAGES FOR
LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION OR LOSS OF BUSINESS
INFORMATION), EVEN IF COMPAQ HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. THE FOREGOING SHALL APPLY REGARDLESS OF THE NEGLIGENCE OR
OTHER FAULT OF EITHER PARTY AND REGARDLESS OF WHETHER SUCH LIABILITY
SOUNDS IN CONTRACT, NEGLIGENCE, TORT, OR ANY OTHER THEORY OF LEGAL
LIABILITY, AND NOTWITHSTANDING ANY FAILURE OF ESSENTIAL PURPOSE OF ANY
LIMITED REMEDY.
The limited warranties for Compaq products are exclusively set forth in the documentation
accompanying such products. Nothing herein should be construed as constituting a further or additional
warranty.
Compaq ProLiant DL360 Setup and Installation Guide
Second Edition (June 2000)
Part Number 169545-002
Compaq Confidential Need to Know Required
Writer: RWeaver Project: Compaq ProLiant DL360 Setup and Installation Guide Comments:
Part Number: 169545-002 File Name: a-frnt.doc Last Saved On: 6/12/00 6:31 PM
Contents
About This Guide
Text Conventions........................................................................................................xi
Symbols in Text..........................................................................................................xi
Symbols on Equipment..............................................................................................xii
Rack Stability .......................................................................................................... xiii
Getting Help ............................................................................................................ xiii
Compaq Technical Support .............................................................................. xiii
Compaq Website................................................................................................xiv
Compaq Authorized Reseller.............................................................................xiv
Chapter 1
Server Features
ProLiant DL360 Server............................................................................................ 1-1
Front Panel Components .................................................................................. 1-3
Rear Panel Components.................................................................................... 1-4
Internal Components......................................................................................... 1-5
Industry Support ...................................................................................................... 1-6
Compaq Confidential Need to Know Required
Writer: RWeaver Project: Compaq ProLiant DL360 Setup and Installation Guide Comments:
Part Number: 169545-002 File Name: a-frnt.doc Last Saved On: 6/12/00 6:31 PM
iv Compaq ProLiant DL360 Setup and Installation Guide
Server Features
continued
Standard Features..................................................................................................... 1-6
Processors ......................................................................................................... 1-6
System Memory................................................................................................ 1-6
Expansion Slots................................................................................................. 1-7
Integrated Smart Array Controller .................................................................... 1-7
Integrated Network Interface Controllers ......................................................... 1-8
Mass Storage Devices ....................................................................................... 1-8
Standard Interfaces ........................................................................................... 1-9
Video................................................................................................................. 1-9
ROM ................................................................................................................. 1-9
Power Supply.................................................................................................. 1-10
Optional Rack Deployment Solutions............................................................. 1-10
Desktop Chassis Option.................................................................................. 1-13
Compaq Remote Insight Lights-Out Edition (Optional)................................. 1-13
Warranties ....................................................................................................... 1-13
Server Management and Configuration ................................................................. 1-14
Default Configuration ..................................................................................... 1-14
Compaq SmartStart......................................................................................... 1-15
Server Management ........................................................................................ 1-15
Disk Management/Fault Tolerance................................................................. 1-16
Compaq Insight Manager................................................................................ 1-16
Compaq System Configuration Utility ........................................................... 1-16
Automatic Server Recovery-2 (ASR-2) .......................................................... 1-17
Compaq Integrated Remote Console .............................................................. 1-17
Unit Identification Switches (Front and Rear) ................................................ 1-18
Status LED Indicators ..................................................................................... 1-19
Compaq Remote Insight Lights-Out Edition (Optional)................................. 1-19
Security Features.................................................................................................... 1-20
Diagnostics............................................................................................................. 1-20
Chapter 2
Installing Hardware Options
Hardware Option Procedures ................................................................................... 2-2
Other Options........................................................................................................... 2-3
Preparing the Server................................................................................................. 2-3
Powering Down the Server ............................................................................... 2-3
Access Panel Warnings..................................................................................... 2-6
Removing the Access Panel.............................................................................. 2-7
Installing the Access Panel ............................................................................... 2-8
Removing the Shipping/Ejector Key ................................................................ 2-9
Identifying System Board Components .......................................................... 2-10
Compaq Confidential Need to Know Required
Writer: RWeaver Project: Compaq ProLiant DL360 Setup and Installation Guide Comments:
Part Number: 169545-002 File Name: a-frnt.doc Last Saved On: 6/12/00 6:31 PM
Contents v
Installing Hardware Options
continued
Upgrading a Processor ........................................................................................... 2-12
Removing a Processor .................................................................................... 2-13
Installing a New Processor ............................................................................. 2-15
Memory ................................................................................................................. 2-17
Installing DIMMs .................................................................................................. 2-18
Installing an Expansion Board............................................................................... 2-20
Identifying the Expansion Slots...................................................................... 2-20
Removing the PCI Riser Board Assembly ..................................................... 2-21
Removing the Expansion Slot Covers ............................................................ 2-23
Installing an Expansion Board........................................................................ 2-24
Installing a Compaq Smart Array/SCSI Controller Interface Assembly ............... 2-29
Removing the CD-ROM/Diskette Drive Assembly............................................... 2-33
Installing the CD-ROM/Diskette Drive Assembly ................................................ 2-35
Removing Hot-Plug SCSI Hard Drive Blanks....................................................... 2-36
Guidelines for Installing Hot-Plug Wide Ultra2 SCSI Hard Drives ...................... 2-37
SCSI ID Numbers for Wide Ultra2 SCSI Models .......................................... 2-38
Installing External Storage Devices................................................................ 2-38
Installing Hot-Plug Wide Ultra2 SCSI Hard Drives .............................................. 2-39
Chapter 3
Installing the ProLiant DL360 Server
Additional Resource Information on Rack Installations.......................................... 3-2
Rack Warnings and Precautions .............................................................................. 3-3
Server Warnings and Precautions ............................................................................ 3-4
The Optimum Environment ..................................................................................... 3-4
Space Requirements ......................................................................................... 3-4
Power Requirements......................................................................................... 3-5
Grounding Requirements.................................................................................. 3-5
Temperature Requirements............................................................................... 3-6
Airflow Requirements ...................................................................................... 3-6
Server Installation Overview ................................................................................... 3-7
Unpacking the ProLiant DL360 Server ................................................................... 3-9
Installing Expansion Boards and Other Major Hardware Options ........................ 3-10
Server Installation Procedures ............................................................................... 3-10
Measuring with the Template ......................................................................... 3-10
Attaching the Fixed Rack Rails to the Rack ................................................... 3-12
Attaching the Fixed Cable Tray...................................................................... 3-15
Inserting the Server into the Rack .................................................................. 3-16
Connecting the Power Cord and Peripheral Devices ............................................. 3-18
Securing the Cables in the Fixed Cable Tray......................................................... 3-20
Powering Up the Server......................................................................................... 3-21
Removing the Server from the Rack...................................................................... 3-23
Configuring the Server with Compaq SmartStart .................................................. 3-27
Compaq Confidential Need to Know Required
Writer: RWeaver Project: Compaq ProLiant DL360 Setup and Installation Guide Comments:
Part Number: 169545-002 File Name: a-frnt.doc Last Saved On: 6/12/00 6:31 PM
vi Compaq ProLiant DL360 Setup and Installation Guide
Installing the ProLiant DL360 Server
continued
Using Diagnostic Tools.......................................................................................... 3-28
Registering Your Server......................................................................................... 3-29
Routine Maintenance ............................................................................................. 3-29
Optional Installation Service.................................................................................. 3-29
Chapter 4
Integrated Smart Array Controller
Features .................................................................................................................... 4-1
SCSI Ports................................................................................................................ 4-2
Array Configuration................................................................................................. 4-2
Chapter 5
Remote Insight Lights-Out Edition (Optional)
Introduction .............................................................................................................. 5-1
Features .................................................................................................................... 5-3
Installing the Remote Insight Lights-Out Edition .................................................... 5-5
Compaq Insight Manager Access............................................................................. 5-9
Browser Support ...................................................................................................... 5-9
Configuration and Operation.................................................................................. 5-10
Chapter 6
Cabling Guidelines
Internal Cabling ....................................................................................................... 6-1
Internal Cabling for Mass Storage Devices ...................................................... 6-1
Internal Cabling for ProLiant DL360 Server Options....................................... 6-3
External Cabling ...................................................................................................... 6-4
Connecting the Power Cord and Peripheral Devices ........................................ 6-4
Routing the Power Cord and Peripheral Device Cables ................................... 6-5
External Mass Storage Cabling......................................................................... 6-6
ProLiant DL360 Maximum External Storage Cabling ..................................... 6-9
Chapter 7
Server Configuration and Utilities
SmartStart Features .................................................................................................. 7-1
Reapplying the System ROMPaq ..................................................................... 7-1
Compaq System Configuration Utilities ........................................................... 7-2
Launching the SmartStart CD .................................................................................. 7-4
Launching the System Configuration Utilities......................................................... 7-6
System Configuration Utilities Main Menu ............................................................. 7-7
Menu Overview ................................................................................................ 7-7
System Configuration Menu ............................................................................. 7-7
Compaq Confidential Need to Know Required
Writer: RWeaver Project: Compaq ProLiant DL360 Setup and Installation Guide Comments:
Part Number: 169545-002 File Name: a-frnt.doc Last Saved On: 6/12/00 6:31 PM
Contents vii
Server Configuration and Utilities
continued
Operating System Installation................................................................................ 7-15
Processor Operating Support .......................................................................... 7-15
Loading Compaq Device Drivers ................................................................... 7-16
Microsoft Windows NT Device Drivers from Compaq.................................. 7-16
Novell Device Drivers from Compaq............................................................. 7-17
SCO UnixWare Device Drivers from Compaq .............................................. 7-18
Linux Device Drivers from Compaq .............................................................. 7-20
Controller Driver Naming Conventions................................................................. 7-20
Diagnostics and Utilities........................................................................................ 7-21
Chapter 8
Integrated Management Log
Viewing the Log ...................................................................................................... 8-1
Compaq Insight Manager ................................................................................. 8-2
Compaq Survey Utility..................................................................................... 8-3
List of Events........................................................................................................... 8-3
Chapter 9
Troubleshooting
When Your Server Will Not Start............................................................................ 9-1
Minimum Hardware Configuration .................................................................. 9-2
Normal Power-Up Sequence ............................................................................ 9-3
Diagnosis Steps ................................................................................................ 9-4
Problems After Initial Boot...................................................................................... 9-7
Appendix A
Regulatory Compliance Notices
Regulatory Compliance Identification Numbers .....................................................A-1
Federal Communications Commission Notice ........................................................A-1
Class A Equipment ...........................................................................................A-2
Class B Equipment ...........................................................................................A-2
Declaration of Conformity for Products Marked with the FCC Logo
United States Only............................................................................................A-3
Modifications ....................................................................................................A-3
Cables ...............................................................................................................A-3
Canadian Notice (Avis Canadien) ...........................................................................A-4
Class A Equipment ...........................................................................................A-4
Class B Equipment ...........................................................................................A-4
European Union Notice ...........................................................................................A-4
Japanese Notice .......................................................................................................A-5
Taiwanese Notice.....................................................................................................A-5
Compaq Confidential Need to Know Required
Writer: RWeaver Project: Compaq ProLiant DL360 Setup and Installation Guide Comments:
Part Number: 169545-002 File Name: a-frnt.doc Last Saved On: 6/12/00 6:31 PM
viii Compaq ProLiant DL360 Setup and Installation Guide
Regulatory Compliance Notices
continued
Laser Devices.......................................................................................................... A-5
Laser Safety Warnings..................................................................................... A-6
Compliance with CDRH Regulations .............................................................. A-6
Compliance with International Regulations..................................................... A-6
Laser Product Label ......................................................................................... A-6
Laser Information ............................................................................................ A-7
Battery Replacement Notice ................................................................................... A-7
Power Cords............................................................................................................ A-8
Mouse Compliance Statement................................................................................. A-8
Appendix B
Electrostatic Discharge
Preventing Electrostatic Damage .............................................................................B-1
Grounding Methods .................................................................................................B-2
Appendix C
Status LED Indicators
Front Panel Status LED Indicators...........................................................................C-1
Rear Panel Status LED Indicators............................................................................C-3
Hot-Plug SCSI Hard Drive Status LED Indicators ..................................................C-4
System Board Status LED Indicators.......................................................................C-6
Power Status LED Indicator .............................................................................C-7
Processor Error LED Indicators........................................................................C-8
System Interlock LED Indicator .......................................................................C-8
Appendix D
Installing a New Battery
System Board Battery Replacement........................................................................ D-1
Appendix E
Switches and Jumpers
System Configuration Switch (SW2).......................................................................E-1
Enabling ROMPaq Disaster Recovery Mode ................................................... E-3
Setting the NIC Operating Mode ............................................................................. E-3
Changing SCSI Device Jumper Settings..................................................................E-3
Index
Compaq Confidential Need to Know Required
Writer: RWeaver Project: Compaq ProLiant DL360 Setup and Installation Guide Comments:
Part Number: 169545-002 File Name: a-frnt.doc Last Saved On: 6/12/00 6:31 PM
About This Guide
This guide is designed to be used as step-by-step instructions for installation
and as a reference for operation, troubleshooting, and future upgrades. The
chapters are written in a logical sequence to expedite first-time installation. An
overview of the chapters follows.
The ProLiant DL360 server contains unique features and options, as well as
software to enhance configuration and operation. To appreciate the server's
capabilities, see Chapter 1, "Server Features."
Before installing your server, install the hardware options you purchased with
your ProLiant DL360 server. See Chapter 2, "Installing Hardware Options."
Ensure that your rack site complies with required conditions before preparing
and installing your server into a Compaq rack. See Chapter 3, "Installing the
ProLiant DL360 Server."
Now that your server is installed and operating, learn more about the following
items:
I Integrated Smart Array Controller a standard array controller that
supports fault tolerance for internal mass storage. See Chapter 4,
"Integrated Smart Array Controller."
I Remote Insight Lights-Out Edition an optional expansion board that
supports remote access to the server. See Chapter 5, "Remote Insight
Lights-Out Edition."
In Chapter 6, "Cabling Guidelines," you can identify all of the standard
cabling configurations and learn about optional internal and external cabling
configurations for the ProLiant DL360.
Compaq Confidential Need to Know Required
Writer: RWeaver Project: Compaq ProLiant DL360 Setup and Installation Guide Comments:
Part Number: 169545-002 File Name: a-frnt.doc Last Saved On: 6/12/00 6:31 PM
x Compaq ProLiant DL360 Setup and Installation Guide
Configuring your ProLiant DL360 server for the first time is made easier with
utilities on the Compaq SmartStart and Support Software CD. The SmartStart
utility can assist you by installing drivers for hardware and operating systems.
See Chapter 7, "Server Configuration and Utilities."
Compaq's standard management software includes the Integrated Management
Log (IML) that records diagnostic information. Review the capabilities and
functions of this software feature in Chapter 8, "Integrated Management Log."
To prevent hardware damage and loss of data, the ProLiant DL360 server is
designed to operate only when all components are functioning properly. The
server generates event messages and/or suspends operation if a component
becomes degraded from wear or becomes unseated from its connection.
Chapter 9, "Troubleshooting," helps you determine the source of the error and
suggests steps to remedy the situation.
The appendices at the end of this guide provide supplementary and reference
information, such as regulatory notices, guidelines for preventing electrostatic
damage to components, explanations of LED indicators, battery replacement,
and switch settings for the ProLiant DL360 server.
Compaq Confidential Need to Know Required
Writer: RWeaver Project: Compaq ProLiant DL360 Setup and Installation Guide Comments:
Part Number: 169545-002 File Name: a-frnt.doc Last Saved On: 6/12/00 6:31 PM
About This Guide xi
Text Conventions
This document uses the following conventions to distinguish elements of text:
Keys Keys appear in boldface. A plus sign (+) between
two keys indicates that they should be pressed
simultaneously.
USER INPUT User input appears in a different typeface and in
uppercase.
FILENAMES File names appear in uppercase italics.
Menu Options, These elements appear in initial capital letters.
Command Names,
Dialog Box Names
COMMANDS, These elements appear in uppercase.
DIRECTORY NAMES,
and DRIVE NAMES
Type When you are instructed to type information, type
the information without pressing Enter.
Enter When you are instructed to enter information, type
the information and then press Enter.
Symbols in Text
These symbols may be found in the text of this guide. They have the following
meanings.
WARNING: Text set off in this manner indicates that failure to follow directions
in the warning could result in bodily harm or loss of life.
CAUTION: Text set off in this manner indicates that failure to follow directions
could result in damage to equipment or loss of information.
IMPORTANT: Text set off in this manner presents clarifying information or specific
instructions.
Compaq Confidential Need to Know Required
Writer: RWeaver Project: Compaq ProLiant DL360 Setup and Installation Guide Comments:
Part Number: 169545-002 File Name: a-frnt.doc Last Saved On: 6/12/00 6:31 PM
xii Compaq ProLiant DL360 Setup and Installation Guide
NOTE: Text set off in this manner presents commentary, sidelights, or interesting points
of information.
Symbols on Equipment
These icons may be located on equipment in areas where hazardous conditions
may exist.
Any surface or area of the equipment marked with these symbols
indicates the presence of electrical shock hazards. Enclosed area
contains no operator serviceable parts.
WARNING: To reduce the risk of injury from electrical shock hazards,
do not open this enclosure.
Any RJ-45 receptacle marked with these symbols indicates a Network
Interface Connection.
WARNING: To reduce the risk of electrical shock, fire, or damage to
the equipment, do not plug telephone or telecommunications
connectors into this receptacle.
Any surface or area of the equipment marked with these symbols
indicates the presence of a hot surface or hot component. If this
surface is contacted, the potential for injury exists.
WARNING: To reduce the risk of injury from a hot component, allow
the surface to cool before touching it.
Compaq Confidential Need to Know Required
Writer: RWeaver Project: Compaq ProLiant DL360 Setup and Installation Guide Comments:
Part Number: 169545-002 File Name: a-frnt.doc Last Saved On: 6/12/00 6:31 PM
About This Guide xiii
Rack Stability
WARNING: To reduce the risk of personal injury or damage to the equipment,
be sure that:
I The leveling jacks are extended to the floor.
I The full weight of the rack rests on the leveling jacks.
I The stabilizing feet are attached to the rack if it is a single rack installation.
I The racks are coupled together in multiple rack installations.
I Only one component is extended at a time. A rack may become unstable if
more than one component is extended for any reason.
Getting Help
If you have a problem and have exhausted the information in this guide, you
can get further information and other help in the following locations.
Compaq Technical Support
In North America, call the Compaq Technical Phone Support Center at
1
1-800-OK-COMPAQ . This service is available 24 hours a day, 7 days a week.
Outside North America, call the nearest Compaq Technical Support Phone
Center. Telephone numbers for world wide Technical Support Centers are
listed on the Compaq website. Access the Compaq website by logging on to
the Internet:
http://www.compaq.com
Be sure to have the following information available before you call Compaq:
I Technical support registration number (if applicable)
I Product serial numbers
I Product model names and numbers
I Applicable error messages
I Add-on boards or hardware
I Third-party hardware or software
1
For continuous quality improvement, calls may be recorded or monitored.
Compaq Confidential Need to Know Required
Writer: RWeaver Project: Compaq ProLiant DL360 Setup and Installation Guide Comments:
Part Number: 169545-002 File Name: a-frnt.doc Last Saved On: 6/12/00 6:31 PM
xiv Compaq ProLiant DL360 Setup and Installation Guide
I Operating system type and revision level
I Detailed, specific questions
Compaq Website
The Compaq website has information on this product as well as the latest
drivers and Flash ROM images. You can access the Compaq website by
logging on to the Internet:
http://www.compaq.com
Compaq Authorized Reseller
For the name of your nearest Compaq authorized reseller:
I In the United States, call 1-800-345-1518.
I In Canada, call 1-800-263-5868.
Elsewhere, see the Compaq website for locations and telephone numbers.
Compaq Confidential Need to Know Required
Writer: RWeaver Project: Compaq ProLiant DL360 Setup and Installation Guide Comments:
Part Number: 169545-002 File Name: a-frnt.doc Last Saved On: 6/12/00 6:31 PM
1
Chapter
Server Features
The Compaq ProLiantTM DL360 server offers state-of-the-art performance,
high availability, and exceptional functionality in a new ultra-dense form
factor. Its highly serviceable and manageable design makes it an unbeatable
computing solution for high-volume deployment requirements.
ProLiant DL360 Server
The Compaq ProLiant DL360 server supports the latest processor and system
architecture technology, including the following components:
I High-speed front-side bus technology up to 133 MHz
I Dual-processor capability with Intel processors
I Error checking and correcting (ECC) memory
I Integrated Smart Array Controller
I Two embedded Compaq NC3163 Fast Ethernet network interface
controllers (NICs) with 10/100 Wake On Lan (WOL)
I Integrated Remote Console
I Two hot-plug drive bays
I Two full-length PCI slots operating at 33 MHz
I Front panel status LED indicators
ProLiant DL360 servers also support tool-free in-rack accessibility to major
components.
Compaq Confidential Need to Know Required
Writer: RWeaver Project: Compaq ProLiant DL360 Setup and Installation Guide Comments:
Part Number: 169545-002 File Name: b-ch01 Server Features.doc Last Saved On: 6/12/00 6:03 PM
1-2 Compaq ProLiant DL360 Setup and Installation Guide
The ProLiant DL360 server's Integrated Smart Array Controller is a
dual-channel Wide Ultra2 SCSI array controller. Both channels support
low-voltage differential (LVD) SCSI devices. SCSI port 1 supports the
external SCSI connector on the rear panel of the server. SCSI port 2 is
dedicated to controlling the SCSI drives in the internal drive bays.
Among its standard features, the ProLiant DL360 server has minimized
cabling, integrated processor power modules, a removable CD-ROM/diskette
drive assembly, and a unit identification switch that simplifies the logistics of
service procedures. The ProLiant DL360 server also supports numerous
optional features, including processor and memory upgrades, full-graphic
remote management capability, and additional connectivity for enhanced array
control of internal and external storage devices. In-rack serviceability is
possible with an optional rack management solution that contains ball-bearing
slide rails and a cable management system.
This combination of features, performance, form factor, and Compaq
manageability enables the ProLiant DL360 server to support Web and
application hosting and infrastructure applications, while also providing
maximum density in rack configurations.
Figure 1-1. Compaq ProLiant DL360 server
Compaq Confidential Need to Know Required
Writer: RWeaver Project: Compaq ProLiant DL360 Setup and Installation Guide Comments:
Part Number: 169545-002 File Name: b-ch01 Server Features.doc Last Saved On: 6/12/00 6:03 PM
Server Features 1-3
Front Panel Components
The following figure and table show the components on the front panel of the
ProLiant DL360 server, including two 1-inch hot-plug drive bays.
1 2 3 4
1
0
5
6
Figure 1-2. Identifying the front panel components
Table 1-1
Front Panel Components
Item SCSI IDs Configuration
0-1 Hot-plug SCSI hard drive bays
CD-ROM/diskette drive assembly
Front panel LED indicators
Power On/Standby switch
CD-ROM/diskette drive assembly ejector port
Front Unit Identification switch
Compaq Confidential Need to Know Required
Writer: RWeaver Project: Compaq ProLiant DL360 Setup and Installation Guide Comments:
Part Number: 169545-002 File Name: b-ch01 Server Features.doc Last Saved On: 6/12/00 6:03 PM
1-4 Compaq ProLiant DL360 Setup and Installation Guide
Rear Panel Components
The following figure and table show the components on the rear panel of the
ProLiant DL360 server.
3
1 2 10
4 5 6 7 8 9
Figure 1-3. Identifying the rear panel components
Table 1-2
Rear Panel Components
Item Description
Power cord connector
PCI expansion slot 1 (64-bit)
PCI expansion slot 2 (32-bit)
External SCSI connector
Rear Unit Identification LED switch
RJ-45 Fast Ethernet connectors with
10/100-Mbit/s operation
Video connector (blue)
Serial connector (teal)
Hot-plug keyboard connector (purple)
Mouse connector (green)
Compaq Confidential Need to Know Required
Writer: RWeaver Project: Compaq ProLiant DL360 Setup and Installation Guide Comments:
Part Number: 169545-002 File Name: b-ch01 Server Features.doc Last Saved On: 6/12/00 6:03 PM
Server Features 1-5
Internal Components
The following figure and table show the main internal components of the
server.
1 2 3
10
4
9
5
8
7 6
Figure 1-4. Identifying the main internal components
Table 1-3
Internal Components
Item Internal Components
Fan assembly
Processor socket 1 (populated)
Processor socket 2
DIMM sockets
PCI riser board assembly
Power supply
User interface board containing Power On/Standby switch and LEDs
CD-ROM/diskette drive assembly
Integrated Smart Array Controller
Hot-plug SCSI hard drive cages
Compaq Confidential Need to Know Required
Writer: RWeaver Project: Compaq ProLiant DL360 Setup and Installation Guide Comments:
Part Number: 169545-002 File Name: b-ch01 Server Features.doc Last Saved On: 6/12/00 6:03 PM
1-6 Compaq ProLiant DL360 Setup and Installation Guide
Industry Support
Compaq delivers extensive testing and support for major server operating
systems. Because Compaq provides industry-standard buses for expansion,
you have access to thousands of high-performance PCI expansion boards, as
well as support for SCSI devices.
Standard Features
The features described in the following sections are standard on all Compaq
ProLiant DL360 servers, unless otherwise specified.
Processors
ProLiant DL360 servers support the following advanced processor features:
I Integrated Level 2 cache
I Integrated Processor Power Modules
I Processor configurations and models for one or two Intel processors
with up to 133-MHz front-side bus (FSB) operation
I Support for future Intel processors
System Memory
ProLiant DL360 servers support the following memory features:
I 133-MHz registered SDRAM memory (Synchronous DRAM)
I Error checking and correcting (ECC) memory for detecting and
correcting single-bit memory errors
I System memory expandable to 4 GB
I Support for installing single DIMM modules
Compaq Confidential Need to Know Required
Writer: RWeaver Project: Compaq ProLiant DL360 Setup and Installation Guide Comments:
Part Number: 169545-002 File Name: b-ch01 Server Features.doc Last Saved On: 6/12/00 6:03 PM
Server Features 1-7
Expansion Slots
ProLiant DL360 servers provide support for peripheral components. The
expansion slots on the PCI riser board assembly are configured as follows:
I Slot 1 is a 64-bit PCI expansion slot that provides data transfer at up to
267 MB/s
I Slot 2 is a 32-bit PCI expansion slot that provides data transfer at up to
133 MB/s
The PCI bus provides peripheral transactions at a system clock speed of
33 MHz.
Integrated Smart Array Controller
Features of the Integrated Smart Array Controller include:
I 16-MB total memory and 8-MB read-ahead cache
I 32-bit PCI bus master interface
I RAID 0 and 1 disk fault tolerance (on internal drives only)
I Support for up to two internal Wide Ultra2 SCSI hot-plug hard drives
I Support for external tape drives only through the external SCSI
connector on the rear panel
I Easy-to-use Array Configuration Utility
I Option ROM Configuration for Arrays
I Pre-Failure Notification and Pre-Failure Warranty through Compaq
Insight Manager
I Performance monitoring through Compaq Insight Manager
Compaq Confidential Need to Know Required
Writer: RWeaver Project: Compaq ProLiant DL360 Setup and Installation Guide Comments:
Part Number: 169545-002 File Name: b-ch01 Server Features.doc Last Saved On: 6/12/00 6:03 PM
1-8 Compaq ProLiant DL360 Setup and Installation Guide
Integrated Network Interface Controllers
The standard network interface controllers (NICs) provided with your
ProLiant DL360 server have the following features:
I Two embedded Compaq NC3163 Fast Ethernet NICs 10/100 WOL with
Unshielded Twisted Pair (UTP) support
I Autosensing LAN capable at either 10 or 100 Mbit/s
I Full-duplex Ethernet for two-way transmission
I Wake On LAN (WOL) capable
I Two RJ-45 connectors for 10-BaseT or 100TX Ethernet
For more information about the integrated NICs, refer to the Documentation
CD shipped with your server.
Mass Storage Devices
The ProLiant DL360 server can house up to four mass storage devices:
I Up to two 1-inch height Compaq hot-plug SCSI hard drives ,
I A removable CD-ROM/diskette drive assembly including:
G Low-profile 3.5-inch diskette drive
G Low-profile CD-ROM drive
1 2 3
4
Figure 1-5. ProLiant DL360 server drive positions (front view)
Compaq Confidential Need to Know Required
Writer: RWeaver Project: Compaq ProLiant DL360 Setup and Installation Guide Comments:
Part Number: 169545-002 File Name: b-ch01 Server Features.doc Last Saved On: 6/12/00 6:03 PM
Server Features 1-9
Standard Interfaces
The ProLiant DL360 server is equipped with the following standard interfaces:
I Integrated Smart Array Controller (ports 1 and 2)
I Serial (teal)
I Video (blue)
I Hot-plug keyboard (purple)
I Mouse (green)
I Two embedded Compaq NC3163 Fast Ethernet NICs 10/100 WOL with
Unshielded Twisted Pair (UTP) support
I IDE/diskette interface for CD-ROM/diskette drive assembly
I Interface cable connector for Remote Insight Lights-Out Edition option
I Additional internal SCSI connector for a PCI-mounted optional internal
array controller or Wide-Ultra SCSI-3 controller
Video
Standard video integration in ProLiant DL360 servers includes:
I Integrated video controller with maximum resolution of 1280 1024
noninterlaced resolution at 16.7 M
I Support for SVGA, VGA, and EGA graphics resolution
I 4-MB video memory
ROM
Compaq ROM features include:
I Software-upgradable firmware including diagnostics
I ROMPaq utility used to upgrade system ROM
Compaq Confidential Need to Know Required
Writer: RWeaver Project: Compaq ProLiant DL360 Setup and Installation Guide Comments:
Part Number: 169545-002 File Name: b-ch01 Server Features.doc Last Saved On: 6/12/00 6:03 PM
1-10 Compaq ProLiant DL360 Setup and Installation Guide
Power Supply
The ProLiant DL360 server's standard power supply includes:
I 190-W power supply
I Auxiliary power supply output for Compaq Remote Insight Lights-Out
Edition PCI board and WOL network interface controllers
Optional Rack Deployment Solutions
The ProLiant DL360 server also supports several rack deployment options.
Sliding Rail and Cable Management System
Option
The sliding rail and cable management system option allows you to mount the
ProLiant DL360 server on ball-bearing rails that support in-rack serviceability.
The cable management system provides a clean, effective way to route server
cables.
The following figure shows the server extending from the rack on ball-bearing
slide rails.
Figure 1-6. Extending the server on sliding rails
Compaq Confidential Need to Know Required
Writer: RWeaver Project: Compaq ProLiant DL360 Setup and Installation Guide Comments:
Part Number: 169545-002 File Name: b-ch01 Server Features.doc Last Saved On: 6/12/00 6:03 PM
Server Features 1-11
The cable management system channels the server cables along the back of the
server and to connection points on the rack.
Figure 1-7. Cables routed at the rear of the server
Telco Rack Option
The Telco option contains a set of variable-depth rack brackets that support
installation of the ProLiant DL360 server into a Telco rack. These brackets
adjust to fit several types of Telco racks, and the kit contains screws for
mounting.
Figure 1-8. Server mounted in Telco rack
Compaq Confidential Need to Know Required
Writer: RWeaver Project: Compaq ProLiant DL360 Setup and Installation Guide Comments:
Part Number: 169545-002 File Name: b-ch01 Server Features.doc Last Saved On: 6/12/00 6:03 PM
1-12 Compaq ProLiant DL360 Setup and Installation Guide
Third-Party Cabinet Rack Option
Compaq provides a third-party cabinet rack option that allows you to mount
the ProLiant DL360 server in a third-party rack. The variable-depth rack rails
support server installation in racks with depths of 28 to 33 inches (71.12 to
83.82 cm) with cable management tray or depths of 22 to 33 inches (55.8 to
83.82 cm) without cable management tray.
Figure 1-9. Server going into a third-party rack
The following figure shows the optional cable management tray and cables
routed in the rack.
z
Figure 1-10. Cable tray for the third-party rack option
Compaq Confidential Need to Know Required
Writer: RWeaver Project: Compaq ProLiant DL360 Setup and Installation Guide Comments:
Part Number: 169545-002 File Name: b-ch01 Server Features.doc Last Saved On: 6/12/00 6:03 PM
Server Features 1-13
Desktop Chassis Option
The desktop chassis option consists of a slide-on sheet metal chassis that
converts the rack model ProLiant DL360 server for desktop use. After being
installed in the desktop chassis, the server can be deployed for non-rack use.
Figure 1-11. Server mounted in the desktop chassis
Compaq Remote Insight Lights-Out Edition
(Optional)
The ProLiant DL360 server has standard features that support the Remote
Insight Lights-Out Edition option:
I Power supply support for Remote Insight Lights-Out Edition
I Interface cable for Remote Insight Lights-Out Edition (ships with the
server)
I Interface cable connector on the system board
Warranties
The ProLiant DL360 server is equipped with several standard warranties. For
more information, refer to the Important Warranty Information card shipped
with your server.
Compaq Confidential Need to Know Required
Writer: RWeaver Project: Compaq ProLiant DL360 Setup and Installation Guide Comments:
Part Number: 169545-002 File Name: b-ch01 Server Features.doc Last Saved On: 6/12/00 6:03 PM
1-14 Compaq ProLiant DL360 Setup and Installation Guide
Server Management and Configuration
Compaq offers an extensive set of features and optional tools to support
effective server management and configuration. This chapter briefly explains
the following features:
I Default Configuration
I Compaq SmartStart
I Server Management
I Disk Management/Fault Tolerance
I Compaq Insight Manager
I Compaq System Configuration Utility
I Automatic Server Recovery-2 (ASR-2)
I Compaq Integrated Remote Console
I Compaq Integrated Management Log
I Server Health Logs
I Unit Identification Switches
I Status LED Indicators
I Remote Insight Lights-Out Edition option
Default Configuration
When the server is first started, the system ROM detects the unconfigured
state of the hardware and provides default configuration settings for most
devices. By providing this initialization, the system can run diagnostics and
other software applications before running the normal SmartStart and system
configuration programs.
NOTE: If you format and partition your boot drive before running SmartStart and the
system configuration programs, you will not be able to create a system partition or use
the management features that it provides.
As part of the default configuration process, you are prompted for your
intended operating system. On subsequent restarts, you may change your
operating system selection as needed.
Compaq Confidential Need to Know Required
Writer: RWeaver Project: Compaq ProLiant DL360 Setup and Installation Guide Comments:
Part Number: 169545-002 File Name: b-ch01 Server Features.doc Last Saved On: 6/12/00 6:03 PM
Server Features 1-15
An information message indicating that you are running with a default
configuration occurs each time you start the system until you run the System
Configuration Utility.
Compaq SmartStart
SmartStart, which is located on the SmartStart and Support Software CD, is
the recommended way to configure your Compaq server with operating system
software. SmartStart helps you achieve a well-integrated server that ensures
maximum manageability and dependability. For additional information about
configuration, see Chapter 7, "Server Configuration and Utilities."
Server Management
Server Management features perform the following functions:
I The Server Parameter Tracking Utility uses a combination of hardware,
firmware, and industry-standard management software to provide timely
server-environment and subsystem information. This information
includes fault tolerance, performance, and configuration status.
I The Server Fault Tolerance feature supports several fault-tolerance
options for internal disk subsystems and memory system error
correction.
I The Rapid Recovery Services provide fast identification and resolution
of complex faults. This integrated server management includes Server
Health Logs, Automatic Server Recovery-2 (ASR-2), and Compaq
Integrated Remote Console (IRC).
I The Integrated Management Log (IML) provides a detailed log of key
system events. This log is accessible by utilities, including Compaq
Insight Manager and the Remote Insight Lights-Out Edition option.
Compaq Confidential Need to Know Required
Writer: RWeaver Project: Compaq ProLiant DL360 Setup and Installation Guide Comments:
Part Number: 169545-002 File Name: b-ch01 Server Features.doc Last Saved On: 6/12/00 6:03 PM
1-16 Compaq ProLiant DL360 Setup and Installation Guide
Disk Management/Fault Tolerance
Disk management allows the server to recover from a hard drive problem
without interrupting the server's performance. The SCSI Managed Array
Technology (Smart) controller can provide data fault tolerance on internal
drives at the following RAID (Redundant Array of Inexpensive Disks) levels:
I RAID 0 drive striping
I RAID 1 drive mirroring
Compaq Insight Manager
Compaq Insight Manager is installed from the Compaq Management CD and
is an easy-to-use, intuitive software utility designed for collecting server
information. Compaq Insight Manager is used for the following functions:
I Sending fault-condition alerts to a predetermined destination
I Monitoring fault conditions and server performance
I Controlling server security and configuration
I Controlling servers remotely
I Initiating rapid recovery services
With Compaq servers, every hardware subsystem--including disk storage,
system memory, and system processor--has a robust set of management
capabilities. Compaq Full-Spectrum Fault Management prevents faults before
they happen, keeps the system running in the unlikely event of a failure, and
delivers rapid server recovery to normal operation after a fault. See Chapter 7,
"Server Configuration and Utilities," for more information.
Compaq System Configuration Utility
The Compaq System Configuration Utility performs a wide range of
configuration activities including the following:
I Configuring PCI boards automatically
I Providing switch and jumper settings
I Resolving resource conflicts in areas such as memory, processor
upgrades, and mass storage devices such as hard drives, tape drives, and
diskette drives
I Setting and storing power-on features such as date and time
Compaq Confidential Need to Know Required
Writer: RWeaver Project: Compaq ProLiant DL360 Setup and Installation Guide Comments:
Part Number: 169545-002 File Name: b-ch01 Server Features.doc Last Saved On: 6/12/00 6:03 PM
Server Features 1-17
I Storing the operating system's configuration information
I Assisting in the installation of the operating system
I Assisting in running diagnostic tools such as the TEST and INSPECT
utilities
The first time the server is configured, the SmartStart program automatically
creates a system partition and installs the System Configuration Utility.
For more information, refer to the SmartStart documentation and the
Documentation CD shipped with your server.
Automatic Server Recovery-2 (ASR-2)
Automatic Server Recovery-2 (ASR-2) enables the server to boot
automatically from either the operating system or the Compaq Utilities. If
there is a critical system failure, ASR-2 automatically restarts the server and
pages a designated system administrator.
For additional information on the ASR-2 feature, refer to the Documentation
CD that shipped with your server.
Compaq Integrated Remote Console
The standard Compaq Integrated Remote Console (IRC) performs a wide
range of configuration activities. The console has the following features:
I Is accessible with an ANSI terminal
I Operates independently of the operating system
I Provides support for remote server reboot
I Provides access to system configuration
I Uses out-of-band communication with dedicated external management
modem
For information concerning the standard Integrated Remote Console, refer to
the Integrated Remote Console Guide included on the Documentation CD.
Compaq Confidential Need to Know Required
Writer: RWeaver Project: Compaq ProLiant DL360 Setup and Installation Guide Comments:
Part Number: 169545-002 File Name: b-ch01 Server Features.doc Last Saved On: 6/12/00 6:03 PM
1-18 Compaq ProLiant DL360 Setup and Installation Guide
Unit Identification Switches (Front and Rear)
The ProLiant DL360 server is the first Compaq product to offer Unit
Identification switches. Each ProLiant DL360 server has two unit
identification switches, one on the front of the server and one on the back of
the server. When activated from the front of the server, the Front Unit
Identification switch illuminates two LEDs. An LED on the front of the server
indicates that the switch is activated. An LED on the rear of the server, in the
center of the Rear Unit Identification LED switch, provides a visual reference
for service personnel.
When moving between the front and rear of a rack filled with ProLiant DL360
servers, you can use the unit identification switches to quickly identify one or
more ProLiant DL360 servers that require service or maintenance.
Figure 1-12 and Figure 1-13 show the locations of the following items:
I Front Unit Identification switch and LED
I Rear Unit Identification LED switch
1
Figure 1-12. Locating the Front Unit Identification switch and LED
Compaq Confidential Need to Know Required
Writer: RWeaver Project: Compaq ProLiant DL360 Setup and Installation Guide Comments:
Part Number: 169545-002 File Name: b-ch01 Server Features.doc Last Saved On: 6/12/00 6:03 PM
Server Features 1-19
2
Figure 1-13. Locating the Rear Unit Identification LED switch
Status LED Indicators
The ProLiant DL360 server contains several sets of LEDs that indicate the
status of hardware components and settings. For a detailed explanation of LED
status and locations, see Appendix C, "Status LED Indicators."
Compaq Remote Insight Lights-Out Edition
(Optional)
The Compaq Remote Insight Lights-Out Edition option is a PCI-based,
single-board computer that is installed to provide remote management of a
server, regardless of the state of the host server operating system or the host
CPU.
A built-in Intel i960 processor allows the Remote Insight Lights-Out Edition
module to work independent of the host server operating system. This module
provides remote access and video, sends alerts, and performs other functions,
even if the host server operating system is not responding.
For installation and features information, see Chapter 5, "Remote Insight
Lights-Out Edition (Optional)."
Compaq Confidential Need to Know Required
Writer: RWeaver Project: Compaq ProLiant DL360 Setup and Installation Guide Comments:
Part Number: 169545-002 File Name: b-ch01 Server Features.doc Last Saved On: 6/12/00 6:03 PM
1-20 Compaq ProLiant DL360 Setup and Installation Guide
Security Features
Security features for the ProLiant DL360 server include:
I Power-On Password
I Administrator Password
I Network Server Mode
I Diskette Drive Control
I Diskette Write Control
I Diskette Boot Override
I Serial Interface Control
I Compaq QuickLock
I NVRAM Write Protect
I Removable CD-ROM/Diskette Drive Assembly
For more information on these security features, refer to the Documentation
CD shipped with your server.
Diagnostics
ProLiant DL360 software and firmware diagnostics tools available for your
use include:
I Power-On Self-Test (POST)
I Diagnostics (DIAGS)
I Compaq ROMPaq utilities to upgrade flash ROMs
I Automatic Server Recovery-2 (ASR-2)
For information concerning Compaq diagnostic tools, refer to the
Documentation CD shipped with your server.
Compaq Confidential Need to Know Required
Writer: RWeaver Project: Compaq ProLiant DL360 Setup and Installation Guide Comments:
Part Number: 169545-002 File Name: b-ch01 Server Features.doc Last Saved On: 6/12/00 6:03 PM
2
Chapter
Installing Hardware Options
This chapter provides information and procedures for installing hardware
options on ProLiant DL360 servers. For complete instructions, refer to the
installation documentation shipped with each option kit. Refer to the following
items for an illustrated guide to installing Compaq option upgrades:
I Hardware installation and configuration poster shipped with your server
I Labels attached to the inside of the system unit access panel
To streamline the installation process, read the installation instructions for all
of the hardware options and identify similar steps before installing the
hardware options.
After you install hardware options, proceed with the server installation
procedures in Chapter 3, "Installing the ProLiant DL360 Server."
If you encounter any problems during installation, contact your Compaq
authorized reseller.
WARNINGS: To reduce the risk of personal injury or damage to the equipment:
I Heed all warnings and cautions throughout the installation instructions.
I Allow internal system components to cool before touching any surfaces.
I Ensure that the power to the server is turned off and that the AC power
cord is disconnected before removing the access panel.
Compaq Confidential Need to Know Required
Writer: Rob Weaver Project: Compaq ProLiant DL360 Setup and Installation Guide Comments:
Part Number: 169545-002 File Name: c-ch02 Installing Hardware Options.doc Last Saved On: 6/12/00 6:34 PM
2-2 Compaq ProLiant DL360 Setup and Installation Guide
CAUTION: Always ensure that equipment is properly grounded before beginning
| 128276-B21
128277-B21
128278-B21
128279-B21
128280-B21
169545-002
174571-B21
179322-001
|
