Product Details

Intel PRO/100+ Management Adapter - *Advanced management capabilities, such as Wake on LAN and Alert on LAN ,the Intel PRO/100+ Management Adapter delivers industry-leadingperformance and reliability.*Quickspecs
Features Specifications
*Assembly Number* 108897-001
*Bus* PCI Rev. 2.2 compliant
*Chipset* Intel 82559
*Implementation* ArmadaStation EM; Deskpro EN NIC models with serial
number x922xxxxxxxx (or higher) ; Option on other
Deskpro systems; Select Prosignia Desktops;
Professional Workstations.
*Hardware Overview* The Intel PRO/100+ Management Adapter is a high
performance Ethernet adapter with a fully integrated
10BASE-T/100BASE-TX controller for PCI systems.
Also, the adapter supports emerging standards for
system manageability and power management, such as
Advanced Configuration and Power Interface (ACPI)
v1.0 and Wired for Management (WfM) v2.0. This
adapter is based upon the Intel 82559 Ethernet
Controller with new features over the previous 82558
based products. One of the main new features is
Alert on LAN. Also, the adapter is PCI Rev. 2.2
compliant for 3.3 volt auxiliary power systems.
Typically, the 82559 based adapter consumes about
500m watts of power vs. 2 watts for the 82558 based
adapter.
*Standard Features*

TCO Manageability Support for Heartbeat and
Alert functions

Boot ROM with PXE and RPL support

Wakeup signals supported - PCI PME# and 3-pin
header Wakeup

ACPI Wakeup Events - ARP packets, Directed
packets, Magic packet, VLAN Type I, ARP (Ipv6),
NBT Query (under Ipv4), IPX diagnostic, TCO
packet, programmable filter

Power States D0-D3 supported wakeup events

Visual Indicators - 2 LEDS (SPEED led
ON=100Mbps; LNK/ACT led ON=Link, blink=Activity)

*Specifications*
*Intel 82559 Fast The 82559 chip provides the following functions:
Ethernet Controller*
CSMA/CD Protocol Engine

PCI Bus Interface

SMBus interface for Alert on LAN applications

DMA engine for movement of commands, status, and
network data across PCI.

Access to EEPROM and flash boot ROM

Complete functionality necessary for the
10Base-T and 100Base-TX network connections
through a common 10/100Mbps magnetics module.

Complete set of MII management registers for
control and status reporting.

802.3u Auto-Negotiation for automatically
establishing the best possible operating mode,
when connected to other 10Base-T or 100Base-TX
devices whether half or full-duplex capable.

*Network Topology* 10BASE-T, 100BASE-TX

IEEE STANDARD VLANSupport (802.1Q) Intel Priority
Packet (801.1p)
*Wiring* Cat5, 2pr
*Connector* RJ-45
*Multi-packs* 5, 20, 80-pack types
*Plug 'n Play Support* Yes
*Full-duplex capable* Yes
*10/100 Yes
auto-negotiation*
*Operating System Microsoft Windows NT 3.51, 4.0
Support* Microsoft Windows 95, 98
*Network Management* ACPI Support
Wake on LAN
Intel PRO/100 Boot Agent WfM PXE 2.0, RPL, DHCP,
BOOTP, NCP/IPX
Instrumentation: DMI 2.0, WMI and SNMP support
Board and network diagnostics
3-pin auxiliary power cable
*Data rates* 10 & 100Mbps
*Memory* 6KB cache
*Interrupt levels* INTA
*IEEE support* 802.2 & 802.3
*Data path width* 32-bit
*Hardware FCC B, CE
Certifications*
*Data Transfer Mode* Bus-master DMA
*Power Requirement* .67Watts @+5VDC
*Operating 0-55C
Remperature*
*Operating Humidity* 85% at +55C

_Top of page_
Description
===========
Intel Pro/100+ Management Adapter Improves network response time and reduce
support costs with this easy-to-install desktop adapter. With built-in
advanced management capabilities, such as Wake on LAN and Alert on LAN 1 ,
the Intel PRO/100+ Management Adapter delivers industry-leading
performance and reliability. _Top of page_
Features
========
*Remote Management*
The Intel PRO/100+ Management Adapter NIC allows for greater network
manageability by featuring support for the latest Wired for Management (WfM)
2.0 specification. This adapter also provides advanced management features
like Wake on LAN for remote PC Wake-up, Alert on LAN (AoL) for proactive
monitoring of the PC, and the pre-installed PRO/100 Boot Agent for OS
deployment and upgrades.
Wake on LAN (WoL) and Desktop Management Interface (DMI) 2.0 Lowers cost of
ownership by allowing remote power-up and upgrade of the PC from a sleep
state during non-work hours.
*Alert on LAN Hardware Support*
Allows your PC to proactively inform a management workstation when there is
a problem with the PC, such as boot failure, overheating, unauthorized
tampering or even component theft. (Note: Also requires Intel 810, 810e, 820
and future Intel Chipsets, HP Openview, and appropriate client and Server
driver agents.)
*Plug and Play*
Fully compliant with the 2.2 PCI specification allowing for easy
configuration and installation.
*Pre-installed PRO/100 Boot Agent*
Embedded Boot ROM enables a network administrator to upgrade or install new
software onto systems from a remote location. Because the Boot ROM is
embedded, businesses save the time and money they would otherwise spend
qualifying, purchasing and installing Boot ROM chips into Boot ROM sockets.
*PERFORMANCE*
New Intel 82559 Controller Intel's latest high performance chip technology.
*Intel Priority Packet (IEEE 801.1p)*
Traffic prioritization speeds throughput for critical applications.
*Built-in Intel Adaptive Technology*
Fine tunes the adapter to maintain peak performance as the network
environment evolves and full duplex capability increases the performance of
demanding desktop applications.
*10/100 Autosensing*
Automatically connects as the highest available speed.
*STANDARDS- BASED NETWORKING*
Supports all major OSs and NOSs Inter-operable with all major network and PC
operating systems.
*Backwards compatible and common core driver suite*
Integrates with existing Intel and Compaq (Intel based) Fast Ethernet
technology adapters, as well as compatible with Intel's new generation of
server and mobile adapters, for easy and efficient driver installation and
administration.
SPECIFICATIONS
==============
*General Specifications*
Connector RJ-45
Controller Intel 82559
Data Rates Supported 10 & 100 Mbps
Memory 6-KB cache
IEEE support IEEE 802.3/802.3 compliant
Bus Architecture PCI 2.2
Data path width 32-bit
Data transfer mode Bus-master DMA
Hardware certifications FCC, B, CE
Power requirement .67 Watts @ +5VDC
Network Transfer Rate 10Base-T (Half-Duplex) 10 Mb/s
10Base-T (Full-Duplex) 20 Mb/s
100Base-TX (Half-Duplex) 100 Mb/s
100Base-TX (Full-Duplex) 200 Mb/s
*Power and Environmental Specifications*
Operating temperature 32 to 131F/0 to 55C
Operating humidity 85% at 131F/55C
Dimensions 6.4 x 4.78 x 0.75 in/16.25 x 12.14 x 1.9 cm
*Operating System Driver Support*
Microsoft Windows NT 3.51 and 4.0
Microsoft Windows 95,98, and Windows 2000 Beta
Novell NetWare Server 3.11, 3.12, 4.1x, and 5 Server
SunSoft Solaris
SCO UnixWare, OpenDesktop, OpenServer
*Management Capabilities*
ACPI compliant
Wake on LAN and Desktop Management Interface (DMI) 2.0
Alert on LAN support
Pre-installed Intel PRO/100 Boot Agent
Wired for Management 2.0
Intel PROSet Utility
Intel Client Manager software included
*Kit Contents* Intel PRO/100+ Management Adapter hardware
Wake on LAN cable
Installation Guide (on CD)
Intel PRO/100+ Management Adapter NIC Drivers (on CD)
Quick Install card
Product warranty statement
*Warranty *A limited lifetime warranty 2 is included with the product.
_Top of page_
----------------------------------------------------------------------------
108897-001
Page 1 -

3prime solutions for all your HP requirements

     
 


HP is a registered trademark