Description
Features
----------------------------------------------------------------------------
------------------------------------
Feature Specification
Part Numbers Option part #: 317356-B21
Spare part #: 317358-001
Assembly #: 317357-001
Former Product Netelligent 10 T PCI Intel UTP Controller (316700-B21,
Name 317356-B21)
Bus interface 32-bit PCI bus-master interface
Interrupts Automatically configured by Plug & Play EEPROM
supported
Data Transfer 10 Mbps at half duplex, 20 Mbps at full duplex
Transmission Full and half duplex
modes
Compliance IEEE 802.2 and 802.3 10BASE-T compatible
Power 180mA @ 5V maximum
requirements
Certifications FCC Class B, CE Mark
Connector Single RJ-45 connector
Communication Intel 82557 MAC/PHY
processor
Supported Cable support - Cat. 3, 4, 5 UTP (2 or 4 pair) Up to 100
cabling meters (328 feet)
Operating system
support
NDIS 3.x and NDIS 4.x (Microsoft Windows 95, Microsoft
Windows NT)
ODI 16-bit and ODI 32-bit (Novell NetWare)
NDIS 2.0 (most operating systems)
SCO UNIX, and SunSoft
Operating 10 to 55C / 50 to 131F
temperature
Shipping -20 to 65C / -4 to 149F
temperature
Operating Non-condensing 85% - 0%
humidity
Warranty Limited lifetime warranty. Certain restrictions and
information exclusions apply. Contact Compaq Networking Product
Division Sales at 1-800-544-5255 or the Compaq Networking
Technical Support Center (post sales) at 1-800-386-2172 for
details.
_Top-of-page_
Description
===========
Industry Standard -- The Compaq Netelligent 10 T PCI Intel UTP Controller
delivers industry-standard drivers that are compatible with both Compaq and
Intel Ethernet
NICs Performance -- The Compaq Netelligent 10 T PCI Intel UTP Controller
provides plug-and-play capability for conflict-free auto configuration and
easy installation. Full duplex support allows the controller to transmit and
receive data simultaneously for improved aggregate data rates up to 20Mb/s.
Management -- The Compaq Netelligent 10 T PCI Intel UTP Controller offers
standard SNMP MIB support as well as SmartStart support for Compaq server
installation. Remotely monitor activity with Compaq Insight Manager 1 (CIM)
or any SNMP management software.
Redundancy -- The Network Fault Tolerance feature enables the Compaq
Netelligent 10 T PCI Intel UTP Controller to keep an active link by
automatically switching to a backup NIC if a network connection fails.
Boot ROM Support -- There is a socket on the Compaq Netelligent 10 T PCI
Intel UTP Controller for Boot ROM capability. Boot ROM support allows
diskless workstations to connect to the network, increasing security and
lowering the cost of hardware.
Ease of Use -- SmartStart support enables users of Compaq servers to easily
install this controller on any Compaq system by integrating the installation
of the
controller into the setup of the operating system and machine.
Diagnostic LEDs -- Light Emitting Diodes (LEDs) indicate link and network
activity for easy installation and at-a-glance troubleshooting.
Features
========
Glueless 32-bit PCI bus master interface
Programmable transmit threshold for improved bus utilization
On chip counters for network management
Internal transmit and receive FIFOs (3 Kbytes each)
Back -to-back transmit at 100 Mbs within minimum IFS
Flash support up to 1 Mbyte
EEPROM support for configuration and customization feature
section
Early receive interrupt for concurrent processing of receive
data
Interface to MII compliant physical layer components (i.e.,
100BASE-T4)
IEEE 802.3u Auto-Negotiation support for 10BASE-T
Full or half duplex capable at 10 Mbps
IEEE 802.3x flow control support
Interface to MII compliant PHY devices
5 Volt part
160 Pin QFP
Two LED Support
Activity Led
Link Integrity LED
_Top-of-page_
----------------------------------------------------------------------------
| 316700-B21
317356-B21
317357-001
317358-001
|
